Tektronix THD Series THDP0200 Oscilloscope Probe, Differential Type, 200 MHz, BNC Connector

모든 Oscilloscope Probes 열람하기

Subtotal (1 unit)*

₩8,427,194.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 11 개 단위 배송 준비 완료
  • 추가로 2026년 2월 09일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩8,427,194.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
752-7357
Distrelec 제품 번호:
110-48-246
제조사 부품 번호:
THDP0200
제조업체:
Tektronix
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Tektronix

Product Type

Oscilloscope Probe

Probe Type

Differential

Bandwidth

200MHz

Maximum Common Mode Input Voltage

1.5kV

Connector Type

BNC

Model Number

THDP0200

Safety Category Level

CAT II, CAT III

Safety Category Voltage

1000V

Series

THD

Rise Time

1.8ps

Standards/Approvals

ISO 14001, CE, ISO 9001

해당 안됨

COO (Country of Origin):
CN

Tektronix Differential Oscilloscope Probes


The Tektronix THDP0200 is an active differential oscilloscope probe capable of safely measuring differential voltages up to ±1500V. This probe is effective in making measurements in IGBT circuits such as motor drives and power converters. It supports bandwidths up to 200MHz and slew rates up to 275V/ns at 1/250 gain.

A broad portfolio of high-voltage probing solutions that enable users to safely and accurately make floating measurements.

Note:

TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope

Features and Benefits


Bandwidth is DC to 200MHz ;Attenuation ratio is 1:100 and 1:1000;Rise time is 3.5ps ;Input impedance is 10Mohmll2pF;Maximum common mode voltage is ±1.5KV ;Maximum Input voltage is 1000V CAT II 600V CAT III ;Wide compensation range (7pF-30pF);CMRR (typical) is DC: > -80dB 100kHz: > -60dB 3.2MHz: > -30dB 100MHz: > -26dB;Overrange Indicator;Safety Certified;Switchable attenuation;Switchable bandwidth limit;Interface type TekVPI

Applications


High voltage differential probes are used for measuring voltage differences between two test points where neither test point is at ground. They can be found in:

Floating measurements

Switching power supply design

Motor drive design

Electronic ballast design

CRT display design

Power converter design and service

Power device evaluation

BNC interface (P5200A probes)

TekVPI interface (TMDP and THDP Series probes)

TekProbe interface

Certifications


CAT II 1000 V

CAT III 600 V

관련된 링크들