Tektronix THD Series THDP0100 Oscilloscope Probe, Differential Type, 100 MHz, BNC Connector

모든 Oscilloscope Probes 열람하기

Subtotal (1 unit)*

₩12,946,996.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 1월 19일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩12,946,996.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
752-7353
Distrelec 제품 번호:
110-48-245
제조사 부품 번호:
THDP0100
제조업체:
Tektronix
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Tektronix

Probe Type

Differential

Product Type

Oscilloscope Probe

Bandwidth

100MHz

Maximum Common Mode Input Voltage

6kV

Connector Type

BNC

Model Number

THDP0100

Number of Probes

2

Safety Category Level

CAT I, CAT III

Safety Category Voltage

1000V

Series

THD

Rise Time

3.5ps

Standards/Approvals

CE, ISO 14001, ISO 9001

해당 안됨

COO (Country of Origin):
CN

Tektronix Oscilloscope Probes


The Tektronix differential high voltage oscilloscope has the largest differential dynamic range capability. It allows the user to safely measure up to ±6000V. The probe supports bandwidths up to 100MHz and slew rates up to 2500V/ns at 1/1000 gain. This probe is supplied with two sizes of hook tips and has an over-range visual and audible indicator that warns the user when they are exceeding the linear range of the probe.

Note:

TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.

The THDP0100 can measure floating voltages up to 6000V safely. An over-range visual and audible indicator warns the user when the linear range of the probe is exceeded.

Features and Benefits


Bandwidth is DC to 200MHz ;Attenuation ratio is 1:100 and 1:1000;Rise time is 3.5ns ;Input impedance is 40Mohmll2.5pF;Maximum common mode voltage is ±6000KV ;Maximum Input voltage is 2300V CAT I 1000V CAT III ;Typical CMRR DC: >-80dB/100 kHz: >-60dB/3.2 MHz: >-30dB/100 MHz: >-26dB;Overrange Indicator;Safety Certified;Switchable attenuation;Switchable bandwidth limit;Cable length 1.5 m

Applications


High voltage differential probes are used for measuring voltage differences between two test points where neither test point is at ground. They can be found in:

Floating measurements

Switching power supply design

Motor drive design

Electronic ballast design

CRT display design

Power converter design and service

Power device evaluation

BNC interface (P5200A probes)

TekVPI interface (TMDP and THDP Series probes)

TekProbe interface

Certifications


CE certified

ISO certified

CAT I 2300 V

CAT III 1000 V

Supplied with

2 probe tips
2 large hook clips
2 small hook clips
2 probe heads

관련된 링크들