Tektronix TDP Series TDP1500 Oscilloscope Probe, Differential Type, 1.5 GHz, Probe Tip Adapter, BNC Connector

The Tektronix differential active oscilloscope probe offers truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and the versatile device under test connection capabilities, it has excellent high-speed electrical and mechanical performance required for today’s digital system designs. It is specifically designed for use and direct connection to the probe interface used on the DPO7000, DPO4000 and MSO4000 series oscilloscopes.

Bandwidth is DC to 1.5 GHz;Attenuation ratio is 1:10, 1:1;Input impedance is 200Kohmll1pF;Rise time is 265ps;Attenuation ratio is 1:10;Input impedance is 200Kohmll1pF;Rise time is 265ps ;Maximum common mode input voltage is ±7V ;Non-destructive Max input voltage is ±25V (DC+pkAC);Wide compensation range is (15pF-25pF);CMRR (typical) is >60dB at 1MHz, > 25dB @ 1GHz;Excellent common mode rejection - reduces measurement errors in higher common environments;Low capacitive and resistive Loading - maintains signal fidelity and reduces DC biasing interactions;DUT attachment accessories enable connection to fine spaced SMDs;Set-up and control from probe comp box or oscilloscope user interface;AutoZero - zeros out output offset;Remote GPIB/USB probe control through the oscilloscope (requires TEKUSB-488 Adapter for GPIB control on DPO4000 and MSO4000)

The TDP1500 has been designed for use with oscilloscopes with the TekVPI probe interface. These differential probes can be used for design, validation, debugging and characterisation of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FireWire (1394b)

Nylon carrying case
Plastic accessory box
Straight pins
Longhorn VIA adaptor
1-inch and 3-inch solder down
Y lead adapter
MicroCKT test tip
Tip saver
3-inch ground lead
Marker band set