대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩135,078.00
일시적 품절
- 2026년 3월 16일 부터 36 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩135,078.00 |
| 5 - 24 | ₩121,560.80 |
| 25 + | ₩100,053.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 241-4732
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Crimp Connector Type | Terminal | |
| Minimum Wire Size mm² | 16mm² | |
| Maximum Wire Size mm² | 50mm² | |
| Terminal Insulation | Uninsulated | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Crimp Connector Type Terminal | ||
Minimum Wire Size mm² 16mm² | ||
Maximum Wire Size mm² 50mm² | ||
Terminal Insulation Uninsulated | ||
제외
- COO (Country of Origin):
- GB
RS PRO Crimp Die Set, Terminal
RS PRO crimping dies are tools you can use to connect your open wires to crimp-pin connectors. The dies work by tightly squeezing the pin connector and puncturing the connector holding the wires, to make sure they connect and stay connected.
These versatile dies are suitable for terminal sizes of 16 mm², 25 mm², 35 mm² and 50 mm², which means you can use them with a range of wire types. Crimping tools like these dies are often used in metalworking. You can also find them in applications where crimp-pin connectors are commonly used.
The connector pins are handled and packed in accordance with electrostatic discharge (ESD) ANSI/ESD S20.20:2014 and with British (BS EN 61340-5-1:2007) and American (ANSI/ESD S20.20:2014) electrostatic discharge (ESD) requirements. This means you can rest assured that the risk of electrostatic discharge is reduced to a minimum.
These versatile dies are suitable for terminal sizes of 16 mm², 25 mm², 35 mm² and 50 mm², which means you can use them with a range of wire types. Crimping tools like these dies are often used in metalworking. You can also find them in applications where crimp-pin connectors are commonly used.
The connector pins are handled and packed in accordance with electrostatic discharge (ESD) ANSI/ESD S20.20:2014 and with British (BS EN 61340-5-1:2007) and American (ANSI/ESD S20.20:2014) electrostatic discharge (ESD) requirements. This means you can rest assured that the risk of electrostatic discharge is reduced to a minimum.
Features and Benefits
• Terminal crimp connector type
• Maximum wire size of 50 mm²
• Minimum wire size of 16 mm²
• Uninsulated
• Maximum wire size of 50 mm²
• Minimum wire size of 16 mm²
• Uninsulated