Semikron Danfoss SKYPER 12 press-fit C 600A Gate Driver 2, 15 A 20-Pin 15 V

모든 Gate Drivers 열람하기
현재 이용 불가
이 품목의 재입고 여부는 알 수 없으며 제조업체에서 단종되고 있습니다.
RS 제품 번호:
122-0387
제조사 부품 번호:
SKYPER 12 press-fit C 600A
제조업체:
Semikron Danfoss
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Semikron Danfoss

Product Type

Plug & Play Driver Board

Output Current

15A

Pin Count

20

Fall Time

1μs

Driver Type

General Purpose

Rise Time

1μs

Minimum Supply Voltage

14.4V

Number of Drivers

2

Maximum Supply Voltage

15V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Series

SKYPER 12 press-fit C 600A

Standards/Approvals

IEC 60747-1, RoHS, UL Recognised

Mount Type

PCB

Automotive Standard

No

SKYPER® 12 Press-fit IGBT Driver Module


The Semikron SKYPER® 12 press-fit modules are IGBT drivers for SEMIX Press-fit and Econodual Press-fit IGBT modules. The half-bridge driver boards can be mounted directly onto 17mm press-fit modules. With 30% fewer components than other plug-and-play solutions, these drivers achieve an MTBF rate of over 5 million hours at full load and the 1W per channel outputs can drive IGBTs with ratings of up to 600A and 1700V.

For suitable IGBT modules see 122-0385 to 122-0387

• Fits to 1200V & 1700V IGBT modules

• Drives Econodual and SEMIX press-fit modules

• Two 1W output channels for half-bridge applications

• Up to 8 μC gate charge output capacity

• Qualified safe operating area ensures best possible performance

• High reliability with MTBF rate > 5 Million hours

• Short-circuit protected over the complete operating temperature range

• Dynamic Short Circuit Protection (DSCP) by VCE monitoring and direct Soft-Off

• Robust rectangle signal transmission

• High noise immunity with short pulse suppression and robust interface

• Insulated over-temperature trip on secondary side

• Primary and secondary under-voltage protection (UVP)

• Integrated isolated power supply for the secondary side

MOSFET & IGBT Drivers, Semikron


관련된 링크들