Microchip Evaluation Board Boost Converter for MCP1640

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩70,650.40

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보
수량
한팩당
1 - 4₩70,650.40
5 +₩69,240.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
742-4248
제조사 부품 번호:
MCP1640EV-SBC
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Boost LED Regulator Evaluation Board

Power Management Function

Boost Converter

Kit Classification

Evaluation Board

Featured Device

MCP1640

Kit Name

Evaluation Board

Standards/Approvals

ISO

COO (Country of Origin):
CN

MCP1640 Boost Converter Evaluation Board


This evaluation board uses the MCP1640 in a high-efficiency (up to 96%), fixed frequency (500MHz), step-up DC-DC converter

Easy-to-use and minimum number of external components power supply solution for applications powered by one-cell, two-cell, or three-cell alkaline, NiCd/NiMH; one-cell Li-Ion or Li-Polymer batteries

Selection of the best operating mode for efficiency (PWM/PFM)

A wide input voltage range (0.35 to 5.5V) and low start-up voltage (0.65V)

PCB layouts recommendation for SOT23-6 and 2x3mm-8 DFN packages

Three common output voltages to evaluate: 2.0V, 3.3V and 5.0V enable selection (when disabled, the MCP1640 disconnects the path from input to output for true-disconnect).

Input voltage range, VIN: 0.35V to 5.5V, with VIN ≤ VOUT; 1mA load after start-up

Fixed output voltage: 2.0V or 3.3V and 3.3V or 5.0V, selected using a mini dip switch on board

Output current: typical 100mA @ 3.3V Output, 1.2V Input or 350mA @ 5.0V Output, 3.3V Input

Start-up voltage: 0.65V at VIN = 1.2V, VOUT = 3.3V and IOUT = 1mA, resistive load

Automatic PFM/PWM Operation

PWM Switching Frequency = 500 kHz

Enable state selectable using mini-dip switch on board

Peak Input Current Limit up to 800mA

Over-temperature (if the die temperature exceeds 150°C, 10°C hysteresis)

관련된 링크들