STMicroelectronics 1.5 A synchronous step-down switching regulator Step Down Regulator for L6981 for Power Tools

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩67,191.20

Add to Basket
수량 선택 또는 입력
공급 부족
  • 5 개 단위 배송 준비 완료
당사의 현재 재고는 제한중이며, 제조사측에서는 공급 부족을 예상하고 있습니다.
수량
한팩당
1 - 4₩67,191.20
5 +₩65,856.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
218-4821
제조사 부품 번호:
STEVAL-L6981NDR
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Product Type

Buck Converter Evaluation Board

Power Management Function

Step Down Regulator

For Use With

Power Tools

Kit Classification

Evaluation Board

Featured Device

L6981

Kit Name

1.5 A synchronous step-down switching regulator

Standards/Approvals

No

38 V, 1.5 A synchronous step-down switching regulator evaluation board based on the L6981NDR for industrial power systems


STMicroelectronics STEVAL-L6981NDR is based on the L6981NDR synchronous monolithic step-down regulator delivering up to 1.5 A DC.

Its wide input voltage range makes the solution suitable for a broad range of applications.

The device implements peak current mode architecture in a SO 8L package with internal compensation to minimize design complexity and size.

The L6981 is available in low consumption mode (LCM) and low noise mode (LNM) versions.

LCM maximizes efficiency at light-load with controlled output voltage ripple, making the device extremely suitable for battery-powered applications.

LNM makes the switching frequency constant and minimizes the output voltage ripple overload current range, meeting the specification for noise sensitive applications.

The EN pin manages the enable/disable function. The typical shutdown current is 2 μA when disabled. When the EN pin is pulled up, the device is enabled and the internal 1.3 ms soft-start takes place.

Pulse-by-pulse current sensing on both power elements implements effective constant current protection while thermal shutdown prevents thermal run-away.

  • 3.5 V to 38 V operating input voltage

  • Output voltage from 0.85 V to VIN

  • 3.3 V and 5 V fixed output voltage versions

  • 1.5 A DC output current

  • 17 μA operating quiescent current (fixed Vout part numbers)

  • Internal compensation network

  • Low noise mode version for noise sensitive applications

  • 2 μA shutdown current

  • Internal soft-start

  • Enable function

  • Overvoltage protection

  • Output voltage sequencing

  • Thermal protection

  • SO-8 package

  • Synchronization with external clock for LNM devices

    • 관련된 링크들