제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ADAFRUIT INDUSTRIES
	Product Type	Evaluation Board
	Power Management Function	Stepper Motor
	For Use With	All Feather Board
	Kit Classification	Add On Board
	Featured Device	ATmega32U4, ATSAM M0, ESP8266
	Kit Name	FeatherWing Add-On Board
	Standards/Approvals	No

	모두 선택
	브랜드 ADAFRUIT INDUSTRIES
	Product Type Evaluation Board
	Power Management Function Stepper Motor
	For Use With All Feather Board
	Kit Classification Add On Board
	Featured Device ATmega32U4, ATSAM M0, ESP8266
	Kit Name FeatherWing Add-On Board
	Standards/Approvals No

DC Motor / Stepper Motor FeatherWing

FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.

You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.

- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.

- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)

- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.

- Motors automatically disabled on power-up

- 3.5 mm terminal block connectors (18-26 AWG)

- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies

- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"

- Weight: 4.6 g

ADAFRUIT INDUSTRIES FeatherWing Add-On Board Stepper Motor for ATmega32U4, ATSAM M0, ESP8266 for All Feather Board

DC Motor / Stepper Motor FeatherWing

Adafruit FeatherWing Add-On Boards

관련된 링크들