Renesas Electronics Half-Bridge Driver

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩118,458.80

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보
수량
한팩당
1 - 4₩118,458.80
5 +₩116,108.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
121-5903
제조사 부품 번호:
HIP2103-4DEMO2Z
제조업체:
Renesas Electronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Renesas Electronics

Power Management Function

Half-Bridge Driver

Kit Classification

Development Board

HIP2103/HIP2104, 3-Phase, Half Bridge Motor Drivers, Intersil


The HIP2103-4DEMO1Z Demonstration Board, is a general purpose motor drive module with a microprocessor controller on-board. It uses a PIC microcontroller to control the HIP2103 and the HIP2104 half bridge drivers with six MOSFETs.
The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 and the HIP2104 half bridge drivers which control six on-board MOSFETs configured as a 3-phase bridge. Two inputs per a phase are provided to control independently the high side driver and the low side driver.
The boards are designed for Full, or Half Bridge brushed DC motors and 3-phase brushless DC (BLDC) motor applications. It can be used in any application that requires any combination of three independent half bridges.

HIP2103-4DEMO1Z


MOSFET bridge supply voltage up to 60 V
3.3 V and 12 V LDO voltage regulators with dedicated enable pins (HIP2104)
Sleep mode quiescent current: 5 μA
Under Voltage-Lockout (UVLO): 4 V
3.3 V or 5 V CMOS compatible inputs with hysteresis
High current MOSFETs with integrated bootstrap diode

HIP2103-4DEMO2Z


MOSFET bridge supply voltage from 5 V to 40 V dc
High current MOSFETs on-board with integrated bootstrap diode
Large diameter holes for wire connections to motor and power source
12-pin through-hole header for signal connections to an external controller
Optional heatsink can be accommodated on the PCB back-side

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



Motor Controllers & Drivers, Intersil

관련된 링크들