제조사부품번호

Igus Positioning Table SHT-12-AWM-500, 2.8 kN

RS 제품 번호:: 488-6038
제조사 부품 번호:: SHT-12-AWM-500
제조업체:: Igus

Igus Positioning Table SHT-12-AWM-500, 2.8 kN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩801,860.00

추가로 2026년 8월 24일 부터 6 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩801,860.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 488-6038
제조사 부품 번호:: SHT-12-AWM-500
제조업체:: Igus

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Igus
	Product Type	Positioning Table
	Stroke Length	500mm
	Overall Length	645mm
	Static Load Rating	2.8kN
	Carriage Length	85mm
	Carriage Width	85mm
	Standards/Approvals	No
	Series	DryLin SHT

	모두 선택
	브랜드 Igus
	Product Type Positioning Table
	Stroke Length 500mm
	Overall Length 645mm
	Static Load Rating 2.8kN
	Carriage Length 85mm
	Carriage Width 85mm
	Standards/Approvals No
	Series DryLin SHT

DryLin SHT Linear Slide Tables Data Sheet

COO (Country of Origin):: DE

Igus DryLin SHT Series Positioning Table, 500mm Stroke Length, 2.8kN Static Load Rating - SHT-12-AWM-500

This positioning table is a precision linear motion solution designed for accurate translational positioning in industrial environments. It provides a guided carriage on a sliding platform suited to automated systems and assembly equipment. The unit is configured for integration where controlled linear travel and load-bearing capability are required without frequent maintenance.

Features and Benefits:

• 500mm stroke delivers extended travel for longer-axis positioning
• 2.8 kN static load capacity supports substantial payloads
• 645mm overall length simplifies installation planning
• 85mm carriage width enables compact mounting arrangements
• 85mm carriage length affords stable support for mounted components

Applications

• Ideal for component positioning in automated test rigs
• Can be used for repeatable alignment tasks in mechanical workshops

How does the unit cope with heavy stationary loads?

Its static load rating of 2.8 kN defines the maximum non-moving load the system can sustain without permanent deformation.

What carriage footprint should I allow for mounting brackets?

Plan for an 85mm by 85mm carriage contact area to accommodate fixing points and ensure even load distribution.

What installation length should be accounted for in machine layouts?

The complete assembly occupies 645mm overall, which should be included when defining envelope and clearance requirements.

What travel range is available for linear actuation needs?

The linear travel provided is 500 mm, suitable for medium-length strokes within automated sequences.