Weidmuller, 5.08mm Pitch, OMNIMATE SL, 5 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- RS 제품 번호:
- 733-0705
- 제조사 부품 번호:
- 1155610000
- 제조업체:
- Weidmüller
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 5 units)*
₩17,277.20
일시적 품절
- 2026년 4월 08일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 5 - 10 | ₩3,455.44 | ₩17,277.20 |
| 15 - 20 | ₩3,380.24 | ₩16,901.20 |
| 25 + | ₩3,305.04 | ₩16,525.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 733-0705
- 제조사 부품 번호:
- 1155610000
- 제조업체:
- Weidmüller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weidmüller | |
| Pluggable Terminal Block Type | Header | |
| Number of Contacts | 5 | |
| Pitch | 5.08mm | |
| Series | OMNIMATE SL | |
| Number of Rows | 1 | |
| Body Orientation | Right Angle | |
| Mounting Type | Through Hole | |
| Termination Method | Solder | |
| Current Rating | 18.0A | |
| Voltage Rating | 400 V | |
| Contact Material | Copper Alloy | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weidmüller | ||
Pluggable Terminal Block Type Header | ||
Number of Contacts 5 | ||
Pitch 5.08mm | ||
Series OMNIMATE SL | ||
Number of Rows 1 | ||
Body Orientation Right Angle | ||
Mounting Type Through Hole | ||
Termination Method Solder | ||
Current Rating 18.0A | ||
Voltage Rating 400 V | ||
Contact Material Copper Alloy | ||
- COO (Country of Origin):
- DE
Horizontal Closed Ends Thro Hole Headers 3.2mm Pin Length
These SL 5.08mm pitch Omnimate headers have a 3.2mm pin length for optimised Wave soldering.
Note
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
5.08mm Pitch -Weidmüller Omnimate Range
Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.
• The PCB hole has a diameter of 1.3mm
• Screw clamp types accept wire up to 1.5mm²
• Tension clamp and IDC (screwless) options enable fast assembly times
• Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
• Polarising pins prevent mismatch connections.
• Screw clamp types accept wire up to 1.5mm²
• Tension clamp and IDC (screwless) options enable fast assembly times
• Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
• Polarising pins prevent mismatch connections.
관련된 링크들
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 5 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 16 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 9 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 12 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 10 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 15 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 8 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 14 Way, Right Angle, Pluggable Terminal Block, Header, Through Hole, Solder