Weidmuller, 5.08mm Pitch, OMNIMATE SL, 8 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- RS 제품 번호:
- 172-2810
- 제조사 부품 번호:
- 1838040000
- 제조업체:
- Weidmüller
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 Box of 50 units)*
₩170,046.00
일시적 품절
- 2026년 1월 28일 부터 50 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Box* |
|---|---|---|
| 50 - 200 | ₩3,400.92 | ₩170,027.20 |
| 250 + | ₩3,297.52 | ₩164,913.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 172-2810
- 제조사 부품 번호:
- 1838040000
- 제조업체:
- Weidmüller
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Weidmüller | |
| Pluggable Terminal Block Type | Header | |
| Number of Contacts | 8 | |
| Pitch | 5.08mm | |
| Series | OMNIMATE SL | |
| Number of Rows | 1 | |
| Body Orientation | Straight | |
| Mounting Type | Through Hole | |
| Termination Method | Solder | |
| Current Rating | 19.0A | |
| Voltage Rating | 400.0 V | |
| Contact Material | Copper Alloy | |
| 모두 선택 | ||
|---|---|---|
브랜드 Weidmüller | ||
Pluggable Terminal Block Type Header | ||
Number of Contacts 8 | ||
Pitch 5.08mm | ||
Series OMNIMATE SL | ||
Number of Rows 1 | ||
Body Orientation Straight | ||
Mounting Type Through Hole | ||
Termination Method Solder | ||
Current Rating 19.0A | ||
Voltage Rating 400.0 V | ||
Contact Material Copper Alloy | ||
- COO (Country of Origin):
- DE
Vertical Open Ends SMT Headers
These SL-SMT series 5.08mm pitch Omnimate headers have a 3.2mm pin length and a high temperature body material making them suitable for Wave or Reflow soldering. This enable these Through Hole Reflow (THR) connectors to be used on appropriately designed boards using Surface Mount Technology (SMT).
Note
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
5.08mm Pitch -Weidmüller Omnimate Range
Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.
• The PCB hole has a diameter of 1.3mm
• Screw clamp types accept wire up to 1.5mm²
• Tension clamp and IDC (screwless) options enable fast assembly times
• Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
• Polarising pins prevent mismatch connections.
• Screw clamp types accept wire up to 1.5mm²
• Tension clamp and IDC (screwless) options enable fast assembly times
• Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
• Polarising pins prevent mismatch connections.
관련된 링크들
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 8 Way, Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 14 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 3 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 2 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 16 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 8 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 10 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,
- Weidmuller, 5.08mm Pitch, OMNIMATE SL, 11 Way, , Pluggable Terminal Block, Header, Through Hole, Solder Termination,