Better World

Schneider Electric M262 Series Logic Controller, Transistor Output, 4-Input, Digital Input

본 제품군 열람하기

Subtotal (1 unit)*

₩5,671,659.20

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 5월 04일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩5,671,659.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

Better World

Our Better World range features products that make it easy for you to make a greener product choice you can trust. Click here to find out more.

RS 제품 번호:
201-1491
제조사 부품 번호:
TM262M25MESS8T
제조업체:
Schneider Electric
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Schneider Electric

Series

M262

Product Type

Logic Controller

Number of Inputs

4

Output Type

Transistor

Input Type

Digital

Number of Outputs

4

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Standards/Approvals

UL 61010-1 UL 61010-2-201 CSA C22.2 No 61010-1

Length

90mm

Depth

90mm

Width

125 mm

Better World Product

Yes

Display Included

Yes

Battery Backup

Yes

Output Current

0.5A

Program Capacity

32MB

Mount Type

Panel, Plate, Rail

Programming Language Used

Sequential function chart (SFC), Structured Text (ST), Ladder Diagram, Instruction List (IL), FBD, CFC

Supply Voltage

24 V

Schneider Electric Modicon M262 Logic Controller


Forming part of the Modicon M262 range of products is this 8 axes logic motion controller operates at a rated voltage of 24V DC. It has short-circuit and overload protection with automatic reset, reverse polarity protection and a manual short circuit protection.

• The communication port protocols are Ethernet IP/Modbus TCP, Sercos III, Serial link, Modbus RTU and ASCII, HTTP and HTTPS

• 7 remote and 7 local I/O expansion modules

• With a real time clock

• LED signalling

• Dimensions: H100mm x D90mm x W125mm

• Reset time: 200ms automatic reset fast output

• Memory capacity: 32MB for program RAM, 32MB for OS/website RAM, 192MB for system memory RAM

• Maximum leakage current: 10 μA for output

Range Information - Modicon M262


The M262 Logic/Motion Controller is a control system that offers an all-in-one solution for motion applications and a scalable solution for logic applications, with optimised configurations and an open, expandable architecture. The M262 Logic/Motion Controller has various powerful features and can service a wide range of applications. Software configuration, programming, and commissioning are accomplished with the EcoStruxure Machine Expert software version 1.1. Maximum hardware configuration can be achieved as well as local and remote configurations.

Programming Languages - The M262 Logic/Motion Controller is configured and programmed with the EcoStruxure Machine Expert software, which supports the following IEC 61131-3 programming languages:

• IL: Instruction List

• ST: Structured Text

• FBD: Function Block Diagram

• SFC: Sequential Function Chart

• LD: Ladder Diagram

EcoStruxure Machine Expert software can also be used to program these controllers using CFC (Continuous Function Chart) language.

Power Supply - The power supply of the M262 Logic/Motion Controller is 24 Vdc

Real-Time Clock - The M262 Logic/Motion Controller includes a Real-Time Clock (RTC) system. The system time is maintained by capacitors when the power is off. The time is maintained for 1 000 hours when the controller is not supplied.

Run/Stop - The M262 Logic/Motion Controller can be operated externally by the following:

• A hardware Run/Stop switch

• A Run/Stop operation by a dedicated digital input, defined in the software configuration. For more information, refer to Configuration of Digital Inputs (see Modicon M262 Logic/Motion Controller, Programming Guide).

• An EcoStruxure Machine Expert software command

• The system variable PLC_W in a Relocation Table

• The Web server

Memory - Three different memory types - RAM, Flash and Non-volatile RAM which suits a variant of uses and comes in different sizes

Embedded Inputs/Output types - Fast inputs and fast source outputs

Encoder - Incremental and SSI encoder modes available

Removable Storage - The M262 Logic/Motion Controllers include an integrated SD card slot. The main uses of the SD card are:

• Initializing the controller with a new application

• Updating the controller and expansion module firmware

• Applying post configuration files to the controller

• Storing recipes, files

• Receiving data logging files

Embedded Communication Features - The Modicon M262 range features embedded communication features, it has Ethernet, USB Mini-B, Serial Line and Sercos communication ports available.

What is a PLC CPU?


A PLC (programmable logic controller) is an industrial digital computer designed for the control of manufacturing processes or robotic devices where reliability control, simple programming and fault diagnosis is necessary. They were originally built to replace electromechanical relay systems in industrial automation.

A CPU (central processing unit) forms part of the PLC system. PLC CPUs are microprocessor-based and act as the electronic circuitry within an industrial computer. They carry out instructions from the computer program, performing basic mathematical, logical, control, input and output operations.

관련된 링크들