Omron NX-CIF Series Communication Module for Use with Sysmac Machine Automation Controllers and CJ2 Series PLC's

모든 PLC Accessories 열람하기

Subtotal (1 unit)*

₩1,365,274.80

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 8월 25일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,365,274.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
215-8190
Distrelec 제품 번호:
302-29-117
제조사 부품 번호:
NX-CIF210
제조업체:
Omron
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Omron

Accessory Type

Serial Communication Interface Unit

Product Type

Communication Module

Series

NX-CIF

For Use With

Sysmac Machine Automation Controllers and CJ2 Series PLC's

Hazardous Area Certification

No

Standards/Approvals

and KC:KC Registration, ANSI/ISA 12.12.01, cULus:Listed (UL508), EU:EN 61131-2, LR, NK, RCM

Communication Protocol

EtherCAT

The Omron NX I/O provides simplicity and flexibility in connecting serial devices to EtherCAT. It is mounted to NX-series EtherCAT coupler unit and connect various types of serial devices. The serial line monitor on the Sysmac Studio helps easily and reliably connect serial devices.

Just 12 mm wide, saving space in your cabinet.

Three models are available with a choice of one RS-422A/485, one RS-232C, or two RS-232C ports.

Screwless push-in terminal block (1-port model) and D-Sub connector (2-port model) significantly reduce wiring work.

No-protocol communications are supported as the communications protocol.

The maximum baud rate is 230.4 kbps. The baud rate can be selected to match the connected serial devices.

The settings are backed up and saved in the EtherCAT Coupler Unit. This facilitates commissioning and maintenance.

The serial line monitor enables you to check the communications status with serial devices on the Sysmac Studio for easy and reliable startup

of the devices.

관련된 링크들