- RS 제품 번호:
- 521-7708
- 제조업체:
- RS PRO
64 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 5 백 1개
Was ₩27,317.241
귀하의 지불
₩13,381.774
Bag(s) | Per Bag | 한팩당* |
1 + | ₩13,381.774 | ₩2,677.045 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 521-7708
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- GB
제품 세부 사항
RS PRO Bronze Plain Bushes
RS PROs plain bushes are cylindrical components made from bronze used to support and guide spur gears. Spur gears are a type of cylindrical gear that have straight teeth that run parallel to the axis of rotation and are used to transmit power between two parallel shafts. The primary purpose of a bush is to help the gears rotate smoothly and without excessive friction, while also reducing wear and tear on the gears themselves.
Features and Benefits
- Sintered bronze bush
- Oil-less
- Suitable for use with Delrin gears
Specifications
- Bore tolerance: G7
- OD tolerance: s7
- Length tolerance: js13
RS PRO Bronze Plain Bush Variant – Available Separately
- Length: 7 mm, Shaft dia. 3mm, RS stock no: 521-7708
- Length: 8 mm, Shaft dia. 3mm, RS stock no: 521-7720
- Length: 9 mm, Shaft dia. 4mm, RS stock no: 521-7736
- Length: 12 mm, Shaft dia. 4mm, RS stock no: 521-7742
- Length: 12 mm, Shaft dia. 5mm, RS stock no: 521-7758
- Length: 14 mm, Shaft dia. 5mm, RS stock no: 521-7764
Applications
The bushes are typically installed in the gear housing or gearbox and serve as a bearing surface for the gear teeth, allowing them to rotate without coming into direct contact with the housing.
사양
속성 | 값 |
---|---|
Shaft Diameter | 3mm |
Outside Diameter | 5mm |
Material | Bronze |
Length | 7mm |