- RS 제품 번호:
- 191-3880
- 제조사 부품 번호:
- GE40-XL-KTT-B
- 제조업체:
- INA
일시 품절-다음 입고 날짜는 04/06/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당
₩107,168.037
수량 | 한팩당 |
1 - 12 | ₩107,168.037 |
13 - 24 | ₩102,881.661 |
25 + | ₩100,734.16 |
- RS 제품 번호:
- 191-3880
- 제조사 부품 번호:
- GE40-XL-KTT-B
- 제조업체:
- INA
제정법과 컴플라이언스
제품 세부 사항
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
사양
속성 | 값 |
---|---|
Bore Size | 40mm |
Outside Diameter | 80mm |
Static Radial Load Rating | 19800N |