Microchip , 1-Channel Ethernet Transceiver 48-Pin QFN, KSZ9031RNXIC

모든 Physical Layer Transceivers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 pack of 2 units)*

₩10,866.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 16 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
2 - 64₩5,433.20₩10,866.40
66 - 128₩5,348.60₩10,697.20
130 +₩5,235.80₩10,471.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
177-3873
제조사 부품 번호:
KSZ9031RNXIC
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Standard Supported

1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3

Number of Channels per Chip

1

Typical Data Rate

1000Mbit/s

Power Supply Type

Single

Typical Operating Supply Voltage

3.3 V

Mounting Type

Surface Mount

Package Type

QFN

Pin Count

48

Dimensions

7 x 7 x 0.8mm

Maximum Operating Temperature

+85 °C

Automotive Standard

AEC-Q100

Minimum Operating Temperature

-40 °C

COO (Country of Origin):
US
The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.

Single-chip 10/100/1000Mbps Ethernet transceiver
KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
On-chip termination resistors for the differential pairs
On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
Jumbo frame support up to 16KB
125MHz Reference Clock Output
Energy-detect power-down mode

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들