Telemecanique Sensors Diffuse Photoelectric Sensor, Barrel Sensor, 600 mm Detection Range

RS 제품 번호:: 752-5058
제조사 부품 번호:: XUB5BPBNM12
제조업체:: Telemecanique Sensors

Telemecanique Sensors Diffuse Photoelectric Sensor, Barrel Sensor, 600 mm Detection Range

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

가격 개당**

₩148,712.20

11 <재고있음> 5-9영업일내 홍콩 발송*

* 배송 날짜는 선택한 수량과 배송 주소에 따라 달라질 수 있습니다.

수량	한팩당
1 +	₩148,712.20

**다른 단위에 대한 가격 표시

RS 제품 번호:: 752-5058
제조사 부품 번호:: XUB5BPBNM12
제조업체:: Telemecanique Sensors

M18 cylindrical photoelectric sensors

The OsiSense XU general purpose photo-electric sensor from Schneider is available in single mode or multi-mode versions in the following formats: Reflex (XUB 1); Thru-beam (XUB 2); Diffuse (XUB 4); Diffuse with adjustable sensitivity (XUB 5); Polarised reflex (XUB 9).

M18 cylindrical photoelectric sensors in plastic or metal housing
Short-circuit protection and LED status indicator
Single or multi-mode function
2m cable or M12 connector (4 pin) output

How do they work and where can I use them?

An OsiSense Photoelectric has a light beam transmitter (light-emitting diode, LED) and a light-sensitive receiver (photo-transistor). A light-emitting diode is an electronic semi-conductor component emitting light when electric current flows through it. The light can be visible or invisible, depending on the transmission wavelength.

An object is detected when it enters the transmitted light beam and, in so doing, affects the intensity of the light at the receiver.

Depending on the model and application requirements, the transmission beam is either non-visible infrared or ultraviolet (for detection of luminescent materials). It may also be a visible red or green (for colour mark reading etc.) and laser red (for long sensing distance and short focal length).

The advantage of LEDs is their very fast response. To render the system insensitive to ambient light, the current flowing through the LED is modulated to produce a pulsed light transmission. Only the pulsed signal will be used by the photo-transistor and processed to control the load.

Photelectric Sensor Systems Available.

Through-Beam or Multimode (set in through-beam mode).

Longer sensing distance – (up to 100 m – XUBL line).

Precise detection with high repeat accuracy.

Not affected by colour or position angle.

Good resistance to difficult environments – example- dust, dirt.

When using several sensors ensure the sensors do not disrupt each other.

Polarised Reflex system or Multimode (with reflector accessory).

Medium sensing distance – (up to 15 m).

Precise detection.

Only one unit wired.

No effect on detection by colour or position angle.

Visible Red beam transmission.

When using several sensors ensure the sensors do not disrupt each other.

Multimode sensor (with reflector accessory).

Easy alignment. 3 LEDs providing set-up assistance.Anti-interferance function (2 sensors can be used with no alignment precautions). Semi-transparent objects detected by using teach mode function.

Diffuse System or Multimode.

Short sensing distance. Only one unit to be wired.

Easy to use. Fast response. Low cost.

Sensitive to background colours and the working environment (dirt, dust).

When using several sensors ensure the sensors do not disrupt each other.

Optical Forks.

Made from metal a strong and sturdy sensor suitable for packaging and conveying applications with label detection. No alignment needed in through-beam mode.

Only one connection needed. LEDs. Adjustable or fixed. Detect small parts – minimum size detected to 0.05 mm.

High switching frequency from 4 kHz to 25 kHz. – excellent for higher operating rates.

속성	값
Sensor Style	Barrel
Detection Type	Diffuse
Detection Range	0.6 m
Output Type	PNP
Electrical Connection	4-Pin M12 Connector
Maximum DC Voltage	24V
Light Source	Infrared
IP Rating	IP65, IP67
Maximum Current	100 mA
Response Time	<1 ms
Maximum Operating Temperature	+55°C
Housing Material	Nickel Plated Brass
Minimum Operating Temperature	-25°C