Idec Red Panel Mount Indicator, 24V ac/dc, 8.1mm Mounting Hole Size, Solder Tab Termination
- RS 제품 번호:
- 835-7391
- 제조사 부품 번호:
- AP8M122-R
- 제조업체:
- Idec
Subtotal (1 unit)*
₩16,826.00
재고있음
- 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩16,826.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 835-7391
- 제조사 부품 번호:
- AP8M122-R
- 제조업체:
- Idec
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Idec | |
| Voltage Rating | 24V ac/dc | |
| Light Output Colour | Red | |
| Mounting Hole Size | 8.1mm | |
| Lamp Type | LED | |
| Termination Type | Solder Tab | |
| Bezel Colour | Black | |
| Length | 31mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Idec | ||
Voltage Rating 24V ac/dc | ||
Light Output Colour Red | ||
Mounting Hole Size 8.1mm | ||
Lamp Type LED | ||
Termination Type Solder Tab | ||
Bezel Colour Black | ||
Length 31mm | ||
- COO (Country of Origin):
- JP
Idec AP Series
The Idec AP Series of Pilot Lights offer a simple, low cost solution to panel mounted indicating light needs. Available in four panel cut out diameters, with either dome or flat lenses, all units use an integral LED array with built in current limiting resistor. All current models mount with a locking ring that fastens from behind the panel, rendering them tamperproof from outside.
Termination is via solder terminals of various sizes, which would be dependent on the panel cut out. Available in 5V DC, 12V AC/DC or 24V AC/DC
Termination is via solder terminals of various sizes, which would be dependent on the panel cut out. Available in 5V DC, 12V AC/DC or 24V AC/DC
8mm, 10mm, 12mm, and 16mm Round Panel Cutouts
Dome or flat lenses
NEMA 4x degree of protection (watertight/oiltight)
Dome or flat lenses
NEMA 4x degree of protection (watertight/oiltight)
Idec Push Buttons and Accessories
Idec offers a variety of products grouped by various sizes and features which are best suited for your unique project needs.
관련된 링크들
- Idec Green Panel Mount Indicator, 24V ac/dc, 8.1mm Mounting Hole Size, Solder Tab Termination
- Idec Green Panel Mount Indicator, 10.1mm Mounting Hole Size
- Idec Red Panel Mount Indicator, 24V dc, 16.2mm Mounting Hole Size
- Idec Red Panel Mount Indicator, 24V dc, 12.2mm Mounting Hole Size
- Idec Green Panel Mount Indicator, 24V dc, 16.2mm Mounting Hole Size
- NKK Switches Panel Mount Indicator, 8mm Mounting Hole Size, Solder Tab Termination
- RS PRO Yellow Indicator, 14mm Mounting Hole Size, Solder Tab Termination
- Signal Construct Red Indicator, 12V, 8mm Mounting Hole Size, Solder Tab Termination
