Ruland Oldham Coupling MOCT57-16-A

  • RS 제품 번호 745-8138
  • 제조사 부품 번호 MOCT57-16-A
  • 제조업체 Ruland
참조 문서
제정법과 컴플라이언스
COO (Country of Origin): US
제품 세부 사항

Ruland Oldham Coupling Hub - Clamp Style

Ruland Clamp Style Oldham Couplings are ideally suited to enable shafts to be coupled with a small amount of axial and angular misalignment present. The three-piece design consists of two hubs linked by a centre torque disc. The Clamp Style Hubs are manufactured from black anodised aluminium, with replaceable centre discs manufactured from acetal or nylon. Oldham couplings are ideal for light industrial and motion control applications, and, due to their unique design, Oldham couplings offer the ability to protect machinery from torque overload forces (acting as torque limiters), with centre discs that are able to break cleanly.

2 hubs and 1 torque disc required per assembly


Not supplied as a complete unit; 2 Hubs and 1Torque Disc required per assembly.


Ruland Oldham Style Couplings

Paradrive™ couplings are ideal for motion control applications, especially those utilising stepper or servo motors. Their low inertia design is ideally suited to higher speed applications and where electrical isolation is also required. Small angular and axial misalignments may be accommodated.

Securing: 13mm and 19mm anodised aluminium hubs are secured to the shafts with one set screw on each end. 33mm, 35mm and 41mm hubs have 2 set screws set 90° apart

Coupling Types Oldham Coupling
Type Through
Bore 16mm
Outside Diameter 57.2mm
Hub Length 28.7mm
Fastening Clamp
Material Aluminium
Minimum Operating Temperature -23°C
Maximum Operating Temperature +65°C
1 <재고있음> 5-9영업일내 홍콩 발송
단가 Each
(exc. VAT)
1 - 5
6 - 11
12 +