RS PRO DIN Rail Mount Industrial Ethernet Switch, 5 RJ45 Ports, 10/100Mbit/s Transmission

RS 제품 번호:: 144-8673
Distrelec 제품 번호:: 303-90-802
제조업체:: RS PRO

RS PRO DIN Rail Mount Industrial Ethernet Switch, 5 RJ45 Ports, 10/100Mbit/s Transmission

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩116,541.20

재고있음

추가로 2026년 1월 26일 부터 339 개 단위 배송
추가로 2026년 1월 29일 부터 397 개 단위 배송
추가로 2026년 3월 05일 부터 550 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩116,541.20
5 +	₩95,898.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 144-8673
Distrelec 제품 번호:: 303-90-802
제조업체:: RS PRO

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	RS PRO
	Transmission Speed	10/100Mbit/s
	RJ45 Ports	5
	Managed/Unmanaged	Unmanaged
	Mounting	DIN Rail
	Depth	94mm
	Height	99mm
	Maximum Operating Temperature	+80°C
	Maximum Supply Voltage	30V dc
	Minimum Operating Temperature	-40°C
	Minimum Supply Voltage	5V dc
	Number of Ports	5
	Width	23mm
	Switch Type	Unmanaged
	Protocol Type	Ethernet 10/100 Mbit/s
	For Use With	Ethernet Network
	Dimensions	99 x 94 x 23mm
	Weight	115g

	모두 선택
	브랜드 RS PRO
	Transmission Speed 10/100Mbit/s
	RJ45 Ports 5
	Managed/Unmanaged Unmanaged
	Mounting DIN Rail
	Depth 94mm
	Height 99mm
	Maximum Operating Temperature +80°C
	Maximum Supply Voltage 30V dc
	Minimum Operating Temperature -40°C
	Minimum Supply Voltage 5V dc
	Number of Ports 5
	Width 23mm
	Switch Type Unmanaged
	Protocol Type Ethernet 10/100 Mbit/s
	For Use With Ethernet Network
	Dimensions 99 x 94 x 23mm
	Weight 115g

RS PRO DIN Rail Mount 5 Port Compact Ethernet Switch

A reliable and efficient industrial compact Ethernet 5 Port unmanaged switch with galvanically isolated ethernet ports capable of 10/100 Mbps. Ethernet switches, also known as LAN (local area network) switches, are an integral part of any computer network interface.
The ethernet switches industrial temperature range is from -40°C to +80°C and the dual input redundant power supply with wide voltage range means it can be powered from a USB or by 24V power supply. The power terminal is removable with numbered pins for easy wiring. No software is required, you just plug in and connect.

Features and Benefits:

5 Port Compact 10/100 Mbs Ethernet Switch
Ethernet speed - 10/100 fast Ethernet
Integrated DIN Rail Mount with grounding - compact design takes up minimal cabinet space
Redundant dual power inputs: +5V to +30V DC - enables device to be run from a standard car battery
Industrial operating temp range -40°C to +80°C / -40°F to +176°F
Small Footprint Case, only 22.5mm wide, 94mm deep
Non-conducting polyamide casing with removable numbered power terminal for easy wiring
No software required - just plug in any ethernet cable and connect
Power Consumption: 1.35 Watts Max: 260 mAmps@ +5VDC/45mAmps@ +30VDC
Ethernet Ports: 5 x RJ45 jack, 10/100Mhz autosensing, crossover auto sensing (Auto MDIX)
Housing: IP-20 rated non-conducting polyamide case with Easy Wire Removable screw terminal block
Weight: 0.115 kg

Typical Applications:

Industrial hubs are the devices used to connect several Ethernet devices together at one time. They then function as a single network together. They can be used in the following areas:
Automation industries
Energy industries
Machinery & robotics industries
Transportation industries
These RS PRO unmanaged Ethernet switches are suitable for factory floors, vehicle and marine applications.

SW-5XX

The black numbered power terminal block is removable. Two separate sets of power supply inputs terminals are provided, one to +VA and -V and the other to +VB and -V. This provides redundancy; the second power supply automatically takes over in the event of a failure of the first one. If only one power supply is connected then the negative must be connected to one of the -V pairs. The positive can be connected to either the +VA or +VB pins. Power LED will light green when correctly connected.

Pin 1: -V
Pin 2: +VA
Pin 3: +VB
Pin 4: -V
Pin 5: Functional Earth

FAQs

What is the difference between managed and unmanaged switches.

Unmanaged switches let you immediately plug and play devises into your network and cannot be modified or managed. They are usually used in home networks and small businesses.

Managed switches allow for greater control and ideal for larger businesses with a large and growing network.

How many ports do I need on my switch?

Switches can have a different number of port configurations. To help choose the right number of ports you should consider the number of users your network supports. In general, the bigger your business and organisation is, the more ports you will require.

Why RS PRO?

RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.