Fluke 1663 Multifunction Tester 1000V Earth Resistance Measurement With USB

Subtotal (1 unit)*

₩3,416,148.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩3,416,148.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
117-6666
Distrelec 제품 번호:
300-60-460
제조사 부품 번호:
FLK-1663 SCH
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Loop Impedance Test Type

Phase to Neutral, Phase to Earth

Product Type

Multifunction Tester

Automatic RCD Test

Yes

RCD Ramp Test

Yes

Model Number

1663

Insulation Test Voltage

1000V

Maximum Voltage Measurement

500V ac/dc

Test Type

Miniature GPS, Insulation Resistance, Voltage, Continuity, Phase Sequence Test, Frequency, Resistance, Wiring Polarity, MOSFET, RCD Test

Earth Resistance Measurement

Yes

Interface Type

USB

Continuity Test Current

10mA

RCD Test Type

Type S, Type G, AC

Remote Switch Mode

Yes

Standards/Approvals

ANSI/ISAs82.02.01 2000, CE, UL 61010, CSA, EN 610101 Ed 2.0 (200102)

Length

100mm

Weight

1.3kg

Width

250mm

Height

125mm

Test Standards

EN 61557-7, EN 61557-10, EN 61557-1

IP Rating

IP40

Display Type

LCD

Minimum Continuity Resistance

20Ω

Safety Category Level

CAT III, CAT IV

Battery Type

AA

Safety Category Voltage

500V

Power Source

Battery

Maximum Continuity Resistance

2000Ω

제외

COO (Country of Origin):
GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1663 SCH


This multifunction tester provides portable verification of electrical installations and protective devices for professionals in automation, electronics, electrical and mechanical fields. It combines insulation, continuity, voltage and RCD diagnostics with loop and earth resistance measurement in a handheld instrument designed for on-site commissioning and fault finding.

Features & Benefits


• Insulation resistance tester 1000V for high-voltage isolation checks
• Maximum voltage measurement 500V AC/DC for mains verification
• Continuity test current 1mA to assess conductor integrity safely
• Loop impedance phase to earth phase to NEUTRAL for accurate fault-loop assessment
• Automatic RCD test Plus RCD ramp and automatic test Type S Type G to validate protective devices
• USB multifunction electrical tester AA battery operation for data transfer and field portability

Applications


• Suitable for domestic and commercial circuit commissioning requiring loop impedance phase to earth phase to NEUTRAL
• Ideal for RCD selection and verification using RCD ramp and automatic test Type S Type G
• Used for insulation diagnosis where insulation resistance tester 1000V is required
• Can be used for maintenance checks involving continuity and voltage up to 500V AC/DC
• Used with earthing systems as a portable earth resistance metre Fluke for site surveys

What safety categories does it meet for use near distribution equipment?


It is rated for CAT III 500V and CAT IV 300V environments to permit connection close to distribution panels and certain supply-side equipment.

How does the instrument handle earth resistance measurements?


It performs dedicated earth resistance measurement routines suitable for assessing protective earth continuity and impedance on site.

What form factor and weight should I expect for fieldwork?


The instrument is a Compact handheld unit with a width of 250mm, height 125mm, length 100mm and weighs 1.3kg for handheld operation.

Which standards guide its test functionality and safety?


Test behaviour aligns with EN 61557 parts and safety follows standards including EN 61010 and relevant UL/CSA approvals.