Fluke 1662 Multifunction Tester 10000V With Wireless
- RS 제품 번호:
- 117-6665
- Distrelec 제품 번호:
- 300-60-456
- 제조사 부품 번호:
- FLK-1662 SCH
- 제조업체:
- Fluke
Subtotal (1 unit)*
₩2,366,318.40
재고있음
- 12 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩2,366,318.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 117-6665
- Distrelec 제품 번호:
- 300-60-456
- 제조사 부품 번호:
- FLK-1662 SCH
- 제조업체:
- Fluke
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Fluke | |
| Loop Impedance Test Type | Phase to Earth, Phase to Neutral | |
| Product Type | Multifunction Tester | |
| Automatic RCD Test | Yes | |
| Model Number | 1662 | |
| RCD Ramp Test | Yes | |
| Insulation Test Voltage | 10000V | |
| Maximum Voltage Measurement | 1000V | |
| Test Type | Frequency, Miniature GPS, RCD Test, Insulation Resistance, Voltage, Wiring Polarity, Phase Sequence Test, Resistance, Continuity, MOSFET | |
| Interface Type | Wireless | |
| Continuity Test Current | 10mA | |
| Battery Life | 200h | |
| RCD Test Type | Type S, Type G, AC | |
| Length | 100mm | |
| Height | 125mm | |
| Weight | 1.3kg | |
| Remote Switch Mode | Yes | |
| Standards/Approvals | CE, CSA, UL 61010, ANSI/ISAs82.02.01 2000, EN 610101 Ed 2.0 (200102) | |
| Width | 250mm | |
| Test Standards | IEC 60364 | |
| IP Rating | IP40 | |
| Display Type | LCD | |
| Safety Category Voltage | 500V | |
| Power Source | Battery | |
| Safety Category Level | CAT III, CAT IV | |
| Battery Type | AA | |
| Maximum Continuity Resistance | 2000Ω | |
| Minimum Continuity Resistance | 20Ω | |
| 모두 선택 | ||
|---|---|---|
브랜드 Fluke | ||
Loop Impedance Test Type Phase to Earth, Phase to Neutral | ||
Product Type Multifunction Tester | ||
Automatic RCD Test Yes | ||
Model Number 1662 | ||
RCD Ramp Test Yes | ||
Insulation Test Voltage 10000V | ||
Maximum Voltage Measurement 1000V | ||
Test Type Frequency, Miniature GPS, RCD Test, Insulation Resistance, Voltage, Wiring Polarity, Phase Sequence Test, Resistance, Continuity, MOSFET | ||
Interface Type Wireless | ||
Continuity Test Current 10mA | ||
Battery Life 200h | ||
RCD Test Type Type S, Type G, AC | ||
Length 100mm | ||
Height 125mm | ||
Weight 1.3kg | ||
Remote Switch Mode Yes | ||
Standards/Approvals CE, CSA, UL 61010, ANSI/ISAs82.02.01 2000, EN 610101 Ed 2.0 (200102) | ||
Width 250mm | ||
Test Standards IEC 60364 | ||
IP Rating IP40 | ||
Display Type LCD | ||
Safety Category Voltage 500V | ||
Power Source Battery | ||
Safety Category Level CAT III, CAT IV | ||
Battery Type AA | ||
Maximum Continuity Resistance 2000Ω | ||
Minimum Continuity Resistance 20Ω | ||
제외
- COO (Country of Origin):
- GB
Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1662 SCH
This multifunction tester is a portable electrical diagnostic instrument designed for comprehensive verification of circuits and protective devices across industrial and commercial sites. It supports a broad range of electrical measurements, from voltage and frequency checks to RCD and insulation evaluations, and is intended for use where fast, accurate assessment of wiring, protection and continuity is required.
Features & Benefits
• Measures up to 500V AC/DC enabling high-voltage verification
• Insulation tests to 1000V for robust fault finding
• RCD ramp and automatic tests for precise trip characterisation
• Continuity current of 1mA for sensitive continuity assessments
• Wireless Interface enabling remote switching and data transfer
• MOSFET-based continuity and resistance testing for stable outputs
• Insulation tests to 1000V for robust fault finding
• RCD ramp and automatic tests for precise trip characterisation
• Continuity current of 1mA for sensitive continuity assessments
• Wireless Interface enabling remote switching and data transfer
• MOSFET-based continuity and resistance testing for stable outputs
Applications
• Suitable for commissioning power distribution and protective devices
• Ideal for verifying RCD performance during periodic testing
• Used for insulation resistance measurements on motors and cables
• Can be used for loop impedance checks phase to earth on installations
• Suitable for fieldwork where battery operation and portability are required
• Ideal for verifying RCD performance during periodic testing
• Used for insulation resistance measurements on motors and cables
• Can be used for loop impedance checks phase to earth on installations
• Suitable for fieldwork where battery operation and portability are required
What power source does it use for field operations?
It runs on AA batteries and provides extended operation with a rated battery life of 200 h.
Which safety categories does it meet for live work?
It is rated to work within CAT III and CAT IV environments at 500V and 300V respectively.
How does the device handle loop impedance measurements?
Loop impedance testing covers phase-to-earth and phase-to-neutral modes to identify prospective fault currents and verify protective conductors.
What environmental protection does the enclosure provide?
The unit has an IP40 ingress rating suitable for indoor site conditions where solid-object protection is required.
Which standards govern its test routines?
Test sequences are implemented to align with IEC 60364 requirements and the instrument carries recognised approvals such as CE, CSA and UL 61010.
Note
Fluke 1662 replaces the existing Fluke 1651 and Fluke 1652.
Standards
IEC 60364
Supplied with
The Fluke 1662 comes with 6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.