Actuonix Motor Controller, 24V dc, 5 V dc, 4A

모든 Motor Controllers 열람하기

Subtotal (1 unit)*

₩108,342.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 53 개 단위 배송 준비 완료
  • 추가로 2026년 7월 02일 부터 5 개 단위 배송
  • 추가로 2026년 7월 13일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩108,342.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
918-1372
제조사 부품 번호:
LAC-RS
제조업체:
Actuonix
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Actuonix

Product Type

Motor Controller

Supply Voltage

24, 5V dc

Output Voltage

3.3V

Current Rating

4A

Overall Length

50mm

Overall Width

50mm

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

70°C

Standards/Approvals

No

Linear Actuator Control Board


The LAC board from Actuonix is a standalone closed loop control board specially designed for the P series actuators. By using this LAC board with Actuonix actuators you can greatly simplify motor control designs, saving cost and time.

Actuonix motor control IC uses a software-based algorithm which optimises position and speed control. The linear actuator board is then compatible with a wide range of actuators, using only the default settings.

Full customisation is possible due to Actuonix Advanced Configuration Program.

The LAC can be operated as an interface board or a standalone controller with the addition of an external potentiometer and power supply.

Control Modes


0 V to 3.3 V Interface Mode


This mode allows an actuator to be controlled with just a battery, and a potentiometer to signal the desired position to the actuator.

RC Servo Interface Mode


A standard hobby-type remote-control digital servo interface, compatible with servos and receivers from other manufacturers.

4 mA to 20 mA Interface Mode


This mode is compatible with PLC devices typically used in industrial control applications.

PWM Mode


This mode allows control of the actuator using a single digital output pin from an external micro controller.

USB Mode


This mode allows control of the actuator via the computer.

Features and Benefits


• Several control modes available

• Compatible with P series actuators

• Can be operated as an interface board or standalone controller

Application Information


The LAC works with the PQ12-P, L12-P, L16-P and P16-P series actuators. It can also be able to drive other larger actuators that have position feedback.


Micro Linear Actuators


Note

A 6 vdc or 12 vdc power supply is required for operation (not included)

관련된 링크들