Infineon 2-Axis Surface Inclinometer 3 V 5.5 V, SPI, DSO, 8-Pin
- RS 제품 번호:
- 223-8592
- 제조사 부품 번호:
- TLE5012BE5020XUMA1
- 제조업체:
- Infineon
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 reel of 2500 units)*
₩8,394,200.00
일시적 품절
- 2026년 6월 01일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 릴당* |
|---|---|---|
| 2500 - 10000 | ₩3,357.68 | ₩8,394,670.00 |
| 12500 + | ₩3,290.00 | ₩8,226,410.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 223-8592
- 제조사 부품 번호:
- TLE5012BE5020XUMA1
- 제조업체:
- Infineon
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Infineon | |
| Product Type | Inclinometer | |
| Sensor Type | Inclinometer Sensors | |
| Number of Axis | 2 | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Maximum Frequency Response | 4.3kHz | |
| Minimum Frequency Response | 3.8kHz | |
| Minimum Supply Voltage | 3V | |
| Package Type | DSO | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 150°C | |
| Series | TLE5012B | |
| Standards/Approvals | No | |
| Width | 4 mm | |
| Length | 5mm | |
| Height | 1.45mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 3.4mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 Infineon | ||
Product Type Inclinometer | ||
Sensor Type Inclinometer Sensors | ||
Number of Axis 2 | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type SPI | ||
Maximum Frequency Response 4.3kHz | ||
Minimum Frequency Response 3.8kHz | ||
Minimum Supply Voltage 3V | ||
Package Type DSO | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 8 | ||
Maximum Operating Temperature 150°C | ||
Series TLE5012B | ||
Standards/Approvals No | ||
Width 4 mm | ||
Length 5mm | ||
Height 1.45mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 3.4mA | ||
The Infineon TLE5012B series is a 360° angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated giant magneto resistance elements. These raw signals are digitally processed internally to calculate the angle orientation of the magnetic field.
Two separate highly accurate single bit SD-ADC
15 bit representation of absolute angle value on the output
16 bit representation of sine / cosine values on the interface
Bi-directional SSC Interface up to 8 Mbit/s
Supports safety integrity level with diagnostic functions and status information
Output pins can be configured as push-pull or open-drain
Bus mode operation of multiple sensors on one line is possible with SSC or SPC interface
관련된 링크들
- Infineon 2-Axis Surface Inclinometer 3 V 5.5 V, SPI, DSO, 8-Pin
- Infineon 2-Axis Surface Inclinometer 3 V 5.5 V, IIF, DSO, 8-Pin
- Infineon 2-Axis Surface Motion Sensor 3 V 5.5 V, IIF, DSO, 8-Pin
- Infineon Surface Motion Sensor, DSO, 7-Pin
- Murata 3-Axis Surface Inclinometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- Murata 1-Axis Surface Inclinometer 3 V 3.6 V, SPI, Surface Mount, 12-Pin
- Infineon 2-Axis Surface Angle Sensor 3 V 5.5 V, PG-DSO, 8-Pin
- Infineon TLE5012BE5000MS2GOTOBO1 Magnetic Switch Evaluation Board for TLE5012B E5000 TLE5012B