- RS 제품 번호:
- 190-8448
- 제조사 부품 번호:
- LIS3DHHTR
- 제조업체:
- STMicroelectronics
일시 품절-다음 입고 날짜는 24/12/2024 (일/월/년) 이며, 그 후 5-10영업일내 홍콩에서 발송. 정확한 입고 수량에 대한 문의는 krenquiry@rs-components.com 로 연락주세요.
추가완료!
단가 개당가격(3000개가 1릴안에)
₩13,109.24
수량 | 한팩당 | Per Reel* |
3000 - 12000 | ₩13,109.24 | ₩39,327,720.00 |
15000 + | ₩12,847.055 | ₩38,541,165.60 |
*다른 단위에 대한 가격 표시 |
- RS 제품 번호:
- 190-8448
- 제조사 부품 번호:
- LIS3DHHTR
- 제조업체:
- STMicroelectronics
참조 문서
제정법과 컴플라이언스
제품 세부 사항
Features:
- 3-axis, ±2.5 g full-scale
- Ultra-low noise performance: 45 μg/√Hz
- Excellent stability over temperature (<0.4 mg/°C) and time
- 16-bit data output
- SPI 4-wire digital output interface
- Embedded temperature sensor
- 12-bit temperature data output
- Embedded FIFO (depth 32 levels)
- High shock survivability
- Extended operating temperature range (-40 °C to +85 °C)
- ECOPACK®, RoHS and Green compliant
- 3-axis, ±2.5 g full-scale
- Ultra-low noise performance: 45 μg/√Hz
- Excellent stability over temperature (<0.4 mg/°C) and time
- 16-bit data output
- SPI 4-wire digital output interface
- Embedded temperature sensor
- 12-bit temperature data output
- Embedded FIFO (depth 32 levels)
- High shock survivability
- Extended operating temperature range (-40 °C to +85 °C)
- ECOPACK®, RoHS and Green compliant
Description:
The LIS3DHH is an ultra-high-resolution and low noise three-axis linear accelerometer.
The LIS3DHH has a full scale of 2.5 g and is capable of providing the measured accelerations to the application through an SPI 4-wire digital interface.
The sensing element is manufactured using a dedicated micromachining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers.
The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the characteristics of the sensing element.
The LIS3DHH is available in a high-performance (low-stress) ceramic cavity land grid array (CC LGA) package and can operate within a temperature range of -40 °C to +85 °C.
The LIS3DHH is an ultra-high-resolution and low noise three-axis linear accelerometer.
The LIS3DHH has a full scale of 2.5 g and is capable of providing the measured accelerations to the application through an SPI 4-wire digital interface.
The sensing element is manufactured using a dedicated micromachining process developed by STMicroelectronics to produce inertial sensors and actuators on silicon wafers.
The IC interface is manufactured using a CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the characteristics of the sensing element.
The LIS3DHH is available in a high-performance (low-stress) ceramic cavity land grid array (CC LGA) package and can operate within a temperature range of -40 °C to +85 °C.
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
사양
속성 | 값 |
---|---|
Sensor Type | Accelerometer |
Number of Axis | 3 |
Technology | Digital |
Mounting Type | Surface Mount |
Maximum Frequency Response | 440Hz |
Minimum Frequency Response | 235Hz |
Maximum Operating Supply Voltage | 3.6 V |
Minimum Operating Supply Voltage | 1.71 V |
Package Type | LGA |
Sensitivity | 0.076mg/digit |
Pin Count | 16 |
Maximum Operating Temperature | +85 °C |
Minimum Operating Temperature | -40 °C |