Allegro Microsystems 2-Axis Surface Hall Effect Sensor 4 V 24 V, SOT-23W, 5-Pin
- RS 제품 번호:
- 146-4498P
- 제조사 부품 번호:
- A1262LLHLT-T
- 제조업체:
- Allegro Microsystems
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 125 units (supplied on a continuous strip)*
₩156,510.00
재고있음
- 5,870 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 125 + | ₩1,252.08 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 146-4498P
- 제조사 부품 번호:
- A1262LLHLT-T
- 제조업체:
- Allegro Microsystems
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Number of Axis | 2 | |
| Technology | BiCMOS, Planar and Vertical Hall Element | |
| Mount Type | Surface | |
| Magnetic Type | Latch | |
| Minimum Supply Voltage | 4V | |
| Maximum Supply Voltage | 24V | |
| Package Type | SOT-23W | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 5 | |
| Maximum Operating Temperature | 150°C | |
| Length | 2.98mm | |
| Series | A1262 | |
| Standards/Approvals | Lead (Pb) Free, RoHS | |
| Height | 0.95mm | |
| Width | 2.4 mm | |
| Automotive Standard | AEC-Q100 | |
| Response Time | 32μs | |
| Supply Current | 4.5mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Number of Axis 2 | ||
Technology BiCMOS, Planar and Vertical Hall Element | ||
Mount Type Surface | ||
Magnetic Type Latch | ||
Minimum Supply Voltage 4V | ||
Maximum Supply Voltage 24V | ||
Package Type SOT-23W | ||
Minimum Operating Temperature -40°C | ||
Pin Count 5 | ||
Maximum Operating Temperature 150°C | ||
Length 2.98mm | ||
Series A1262 | ||
Standards/Approvals Lead (Pb) Free, RoHS | ||
Height 0.95mm | ||
Width 2.4 mm | ||
Automotive Standard AEC-Q100 | ||
Response Time 32μs | ||
Supply Current 4.5mA | ||
- COO (Country of Origin):
- PH
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the A1232 and A1233 internally process these switch outputs into speed and direction signals.
200 MHz/330 DMIPS, MIPS32 microAptiv core
Dual Panel Flash for live update support
12-bit, 18 MSPS, 45-channel ADC module
Memory Management Unit for optimum embedded OS execution
microMIPS mode for up to 35% code compression
CAN, UART, I2C, PMP, EBI, SQI & Analog Comparators
SPI/I2S interfaces for audio processing and playback
Hi-Speed USB Device/Host/OTG
10/100 Mbps Ethernet MAC with MII and RMII Interface
Advanced Memory Protection
2MB Flash memory (plus an additional 160 KB of Boot Flash)
640KB SRAM memory