Red Lion Magnetic Pick Up Steel 1V
- RS 제품 번호:
- 905-5295
- 제조사 부품 번호:
- MP37CA00
- 제조업체:
- Red Lion
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩191,256.00
재고있음
- 추가로 2026년 5월 05일 부터 1 개 단위 배송
- 추가로 2026년 5월 05일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩191,256.00 |
| 5 - 24 | ₩185,913.00 |
| 25 + | ₩182,188.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 905-5295
- 제조사 부품 번호:
- MP37CA00
- 제조업체:
- Red Lion
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Red Lion | |
| Product Type | Magnetic Pick Up | |
| Body Style | Barrel | |
| Housing Material | Steel | |
| Terminal Type | Wire | |
| Maximum Supply Voltage | 1V | |
| Standards/Approvals | CSA, UL | |
| Mount Type | Threaded | |
| 모두 선택 | ||
|---|---|---|
브랜드 Red Lion | ||
Product Type Magnetic Pick Up | ||
Body Style Barrel | ||
Housing Material Steel | ||
Terminal Type Wire | ||
Maximum Supply Voltage 1V | ||
Standards/Approvals CSA, UL | ||
Mount Type Threaded | ||
- COO (Country of Origin):
- US
Magnetic Pickups
A Magnetic Pickup consists of a permanent magnet, a pole-piece, and a sensing coil all encapsulated in a cylindrical case. An object of iron, steel, or other magnetic material, passing closely by its pole-piece causes distortion of the magnetic flux field passing through the sensing coil and pole-piece, which in turn generates a signal voltage. The magnitude of the signal voltage depends on the relative size of the magnetic target, its speed of approach, and how close it approaches. The polarity of the signal depends on whether the target is moving toward or away from the pole-piece.
Magnetic Pickups are most frequently used to sense passing teeth on a gear, sprocket, or timing belt wheel, to bolt-heads, key-ways, or other moving machine mounted targets. Typical targets and resulting signal wave forms are shown within the datasheet. Selecting a magnetic pickup is a matter of matching a pickup to a gear (or other target), to provide enough input signal to a tachometer, speed-switch, or other device for operation at the required minimum speed. The open-circuit output from a magnetic pickup is directly proportional to speed, and once the minimum operating speed conditions have been met, excess signal will always be available at higher speeds.
Self generating
No external power needed
Wide operating temperature range
Epoxy encapsulated
Mechanically rugged
Impervious to dirt, oil and water
No maintenance required
M12 connector (Model specific)
For use with speed switches, digital tachometers, frequency to D.C. converters
Magnetic Pickups Simple & Reliable Pulse Generators
Red Lion
Note
Magnetic Pickups are used primarily for tachometer and other speed related functions. They are not normally used for counting since loss of counts will occur at low speeds. Therefore, counters are not designed to accept outputs directly from conventional magnetic pickups. In special applications where counting occurs only at running speed or where low-speed count loss is acceptable, a Model ASTC can be used, or a different type of sensor can be used as a substitute.