Infineon OptiMOS-T Type N-Channel MOSFET, 17 A, 250 V Enhancement, 3-Pin TO-263 IPB17N25S3100ATMA1

RS 제품 번호:: 826-9002
제조사 부품 번호:: IPB17N25S3100ATMA1
제조업체:: Infineon

Infineon OptiMOS-T Type N-Channel MOSFET, 17 A, 250 V Enhancement, 3-Pin TO-263 IPB17N25S3100ATMA1

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 pack of 20 units)*

₩78,040.00

780 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
20 - 240	₩3,902.00	₩78,040.00
260 - 480	₩3,804.00	₩76,080.00
500 +	₩3,748.00	₩74,940.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 826-9002
제조사 부품 번호:: IPB17N25S3100ATMA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Channel Type	Type N
	Product Type	MOSFET
	Maximum Continuous Drain Current Id	17A
	Maximum Drain Source Voltage Vds	250V
	Package Type	TO-263
	Series	OptiMOS-T
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	100mΩ
	Channel Mode	Enhancement
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	14nC
	Maximum Power Dissipation Pd	107W
	Forward Voltage Vf	0.9V
	Maximum Operating Temperature	175°C
	Height	4.4mm
	Length	10mm
	Standards/Approvals	No
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Infineon
	Channel Type Type N
	Product Type MOSFET
	Maximum Continuous Drain Current Id 17A
	Maximum Drain Source Voltage Vds 250V
	Package Type TO-263
	Series OptiMOS-T
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 100mΩ
	Channel Mode Enhancement
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 14nC
	Maximum Power Dissipation Pd 107W
	Forward Voltage Vf 0.9V
	Maximum Operating Temperature 175°C
	Height 4.4mm
	Length 10mm
	Standards/Approvals No
	Automotive Standard AEC-Q101

해당 안됨

Infineon OptiMOS-T Series MOSFET, 250V Maximum Drain Source Voltage, 17A Maximum Continuous Drain Current - IPB17N25S3100ATMA1

This MOSFET is a surface‑mount N‑channel enhancement device designed for high‑voltage switching in automotive and industrial power systems. It operates across a wide temperature range and is intended for applications requiring robust thermal endurance and controlled switching performance without detailing its mechanical package or pin count.

Features and Benefits:

• 250V drain rating enabling high‑voltage switching capability
• 17A continuous drain current supporting substantial load currents
• 100 mΩ maximum RDS(on) reducing conduction losses in power stages
• 14 nC typical gate charge for efficient switching control
• 0.9V forward voltage lowering diode conduction drop
• 107W maximum power dissipation permitting high‑power operation

Applications

• Suitable for high‑voltage DC-DC converters in vehicles
• Ideal for motor‑drive half‑bridges in automotive electronics
• Used with power‑management modules in industrial supplies
• Can be used for switch‑mode power supply primary switches

What gate‑drive considerations should I make for switching performance?

Use a driver capable of delivering the gate charge within your targeted switching interval

the typical 14 nC charge lets you estimate peak gate current and switching losses for the chosen drive voltage.

How does the thermal environment affect continuous current capability?

The device’s 107W dissipation rating requires adequate PCB thermal design and heat‑sinking to maintain safe junction temperatures when carrying the specified 17A continuous current.

What protection limits apply to the device’s gate?

Ensure gate voltage remains within ±20V to avoid overstressing the gate oxide and consider transient suppression if exposed to inductive switching spikes.

How tolerant is the device to cold starts and high‑temperature operation?

It is specified to operate from low automotive temperatures up to elevated conditions, aiding use in systems experiencing broad ambient temperature swings.