Omron Phase Monitoring Relay, 3 Phase, SPDT, DIN Rail
- RS 제품 번호:
- 819-3267
- 제조사 부품 번호:
- K8AKPM2380480VAC
- 제조업체:
- Omron
현재 액세스할 수 없는 재고 정보
대체품
이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.
개당
₩275,281.50
- RS 제품 번호:
- 819-3267
- 제조사 부품 번호:
- K8AKPM2380480VAC
- 제조업체:
- Omron
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Omron | |
| Monitoring Application | Phase | |
| Electrical Phase | 3 | |
| Contact Configuration | SPDT | |
| Mounting Type | DIN Rail | |
| Phase Sensitivity | Overvoltage, Phase Loss, Phase Sequence, Undervoltage | |
| Time Delay | 0.1 → 30s | |
| Series | K8AK-PM | |
| Terminal Type | Screw | |
| Maximum Operating Temperature | +60°C | |
| Dimensions | 100 x 22.5 x 90mm | |
| Operating Temperature Range | +60°C | |
| Length | 100mm | |
| Height | 90mm | |
| Width | 22.5mm | |
| Minimum Operating Temperature | -20°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 Omron | ||
Monitoring Application Phase | ||
Electrical Phase 3 | ||
Contact Configuration SPDT | ||
Mounting Type DIN Rail | ||
Phase Sensitivity Overvoltage, Phase Loss, Phase Sequence, Undervoltage | ||
Time Delay 0.1 → 30s | ||
Series K8AK-PM | ||
Terminal Type Screw | ||
Maximum Operating Temperature +60°C | ||
Dimensions 100 x 22.5 x 90mm | ||
Operating Temperature Range +60°C | ||
Length 100mm | ||
Height 90mm | ||
Width 22.5mm | ||
Minimum Operating Temperature -20°C | ||
K8AH-PM2 Monitoring Relay.
• Resistant to inverter noise.
• Monitors over voltage, under voltage, phase sequence and loss for 3 and 4 wire power supplies.
• Switch setting.
• 2 x SPDT output relays.
• 5 A (resistive load) at 250 V ac
K8AK-PM2 Model.
3-phase 3 wire mode, 380, 400, 415, 480 V ac.
3-phase 4 wire mode, 220, 230, 240, 277 V ac.
3-phase 3 or 4 wire input rages is switched using a DIP switch.
Power supply voltage is the same as the rated input value.
Features and Benefits.
• Input load 4.4 VA
• Automatic reset method.
• Power on LOCK time 1 s/5s (changed with the DIP Switch).
• Two SPDT relays NC (normally closed)
• Power (PWR) indicator – Green.
• Relay (RY) output – Yellow.
• Over / under - Red
• Case is PC and ABS, UL 94-V-0, N1.5.
• Weight 150 g.
• DIN Rail mounted.
• Protection IP 20
What is a Monitoring / Measuring Relay?
A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.
Types of Monitoring Relays Available?
• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current
Standards
EN 60947-5-1, UL 508, IP 20