Dold Phase Monitoring Relay, 3 Phase, SPDT, DIN Rail
- RS 제품 번호:
- 445-9074
- 제조사 부품 번호:
- BH9097.38/001 3AC400V AC40A
- 제조업체:
- Dold
Subtotal (1 unit)*
₩923,004.80
재고있음
- 추가로 2026년 3월 02일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩923,004.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 445-9074
- 제조사 부품 번호:
- BH9097.38/001 3AC400V AC40A
- 제조업체:
- Dold
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Dold | |
| Monitoring Application | Phase | |
| Electrical Phase | 3 | |
| Contact Configuration | SPDT | |
| Mounting Type | DIN Rail | |
| Time Delay | 0 → 10s | |
| Series | BH 9097 | |
| Height | 84mm | |
| Minimum Operating Temperature | -20°C | |
| Dimensions | 121 x 45 x 84mm | |
| Width | 45mm | |
| Operating Temperature Range | +55°C | |
| Length | 121mm | |
| Maximum Operating Temperature | +55°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 Dold | ||
Monitoring Application Phase | ||
Electrical Phase 3 | ||
Contact Configuration SPDT | ||
Mounting Type DIN Rail | ||
Time Delay 0 → 10s | ||
Series BH 9097 | ||
Height 84mm | ||
Minimum Operating Temperature -20°C | ||
Dimensions 121 x 45 x 84mm | ||
Width 45mm | ||
Operating Temperature Range +55°C | ||
Length 121mm | ||
Maximum Operating Temperature +55°C | ||
- COO (Country of Origin):
- DE
Load monitor BH 9097
The load monitor is suitable for monitoring electrical industrial drive systems with variable motor loads.
Features:
The BH 9097 load monitor monitors the actual power consumption of electrical loads
The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level
P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches
Test / reset buttons for simple start-up
Switch state indicator via 2 LEDs
For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage
Up to 40 A without external current transformer
Configurable start-up bridging, configurable response delay
Overall width 45 mm
The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level
P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches
Test / reset buttons for simple start-up
Switch state indicator via 2 LEDs
For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage
Up to 40 A without external current transformer
Configurable start-up bridging, configurable response delay
Overall width 45 mm
Standards
IEC 255, EN 60255, VDE 0435 part 303
관련된 링크들
- Dold Phase Monitoring Relay, 3 Phase, SPDT, DIN Rail
- Dold Insulation Monitoring Relay, 1, 3 Phase, SPDT, 0 → 500V ac, DIN Rail
- Dold Voltage Monitoring Relay, 3 Phase, SPDT, DIN Rail
- Dold Phase Monitoring Relay, 3 Phase, DPDT, DIN Rail
- Dold Voltage Monitoring Relay, 3 Phase, DPDT, DIN Rail
- Dold Multifunction Monitoring Relay, 3 Phase, SPDT, 24 → 400V ac, DIN Rail
- Dold Phase Monitoring Relay, 3 Phase, DIN Rail
- Dold Current Monitoring Relay, 1 Phase, SPDT, DIN Rail