Eaton Phase, Voltage Monitoring Relay, 3 Phase, 300 → 500V ac, DIN Rail
- RS 제품 번호:
- 179-3530
- 제조사 부품 번호:
- 184764 EMR6-AW500-D-1
- 제조업체:
- Eaton
Subtotal (1 unit)*
₩461,822.00
재고있음
- 추가로 2025년 12월 15일 부터 7 개 단위 배송
- 추가로 2025년 12월 23일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩461,822.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 179-3530
- 제조사 부품 번호:
- 184764 EMR6-AW500-D-1
- 제조업체:
- Eaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Eaton | |
| Monitoring Application | Phase, Voltage | |
| Electrical Phase | 3 | |
| Voltage Sensing Range | 300 → 500V ac | |
| Voltage Sensitivity | Overvoltage, Undervoltage | |
| Mounting Type | DIN Rail | |
| Minimum Current Sensed | 3A | |
| Maximum Current Sensed | 4A | |
| Phase Sensitivity | Phase Failure, Phase Imbalance, Phase Sequence | |
| Time Delay | 0.1 → 30s | |
| Frequency Sensing Range | 50 → 60Hz | |
| Maximum Voltage Sensed | 500V ac | |
| Terminal Type | Screw | |
| Length | 109.5mm | |
| Dimensions | 109.5 x 22.5 x 78mm | |
| Minimum Frequency Sensed | 50Hz | |
| Operating Temperature Range | +60°C | |
| Maximum Frequency Sensed | 60Hz | |
| Maximum Operating Temperature | +60°C | |
| Width | 22.5mm | |
| Height | 78mm | |
| Minimum Operating Temperature | -25°C | |
| Minimum Voltage Sensed | 300V ac | |
| 모두 선택 | ||
|---|---|---|
브랜드 Eaton | ||
Monitoring Application Phase, Voltage | ||
Electrical Phase 3 | ||
Voltage Sensing Range 300 → 500V ac | ||
Voltage Sensitivity Overvoltage, Undervoltage | ||
Mounting Type DIN Rail | ||
Minimum Current Sensed 3A | ||
Maximum Current Sensed 4A | ||
Phase Sensitivity Phase Failure, Phase Imbalance, Phase Sequence | ||
Time Delay 0.1 → 30s | ||
Frequency Sensing Range 50 → 60Hz | ||
Maximum Voltage Sensed 500V ac | ||
Terminal Type Screw | ||
Length 109.5mm | ||
Dimensions 109.5 x 22.5 x 78mm | ||
Minimum Frequency Sensed 50Hz | ||
Operating Temperature Range +60°C | ||
Maximum Frequency Sensed 60Hz | ||
Maximum Operating Temperature +60°C | ||
Width 22.5mm | ||
Height 78mm | ||
Minimum Operating Temperature -25°C | ||
Minimum Voltage Sensed 300V ac | ||
- COO (Country of Origin):
- DE
Eaton Multifunctional Phase Monitoring Relay, 300 to 500 V AC, 50 to 60 Hz - EMR6 Series - EMR6-AW500-D-1
This phase monitoring relay from Eaton is a safety device used to trip a circuit breaker when a fault is detected. For versatility and enhanced safety, it's a multifunctional component that can be used to monitor phase sequence or failure, undervoltage or overvoltage and current imbalances. It offers a flexible supply voltage range of 300 to 500 V AC, making it suitable for a range of industrial and commercial applications.
• Wide operating temperature range of -25°C to +60°C for use in challenging environments
• Long lifespan of 30 million operations
• Ingress protection rating of IP50 means the enclosure is protected against dust
• Short time delay of 0.1 to 30 s for rapid monitoring
• Long lifespan of 30 million operations
• Ingress protection rating of IP50 means the enclosure is protected against dust
• Short time delay of 0.1 to 30 s for rapid monitoring
How do I read the relay status?
The relay has multicoloured LEDs (light-emitting diodes) that indicate the type of fault detected. Each condition has an associated LED and/or colour (red, yellow or green) for ease of identification.
Why is monitoring phase imbalance important?
In a three-phase system, phase imbalances can make some motors carry a heavier load than others in the system. This can cause excessive heat and damage to the motor.
Note
Eaton formerly known as Moeller