Microchip, 8bit PIC, PIC18F Microcontroller, 40MHz, 1.024 kB, 128 kB Flash, 80-Pin TQFP

모든 Microcontrollers 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tray of 119 units)*

₩2,846,389.56

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 1월 12일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tray*
119 - 476₩23,919.24₩2,846,389.56
595 +₩23,441.72₩2,789,474.44

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
887-7114
제조사 부품 번호:
PIC18F8722-I/PT
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Family Name

PIC18F

Package Type

TQFP

Mounting Type

Surface Mount

Pin Count

80

Device Core

PIC

Data Bus Width

8bit

Program Memory Size

1.024 kB, 128 kB

Maximum Frequency

40MHz

RAM Size

3.936 kB

USB Channels

0

Number of PWM Units

5

Number of SPI Channels

2

Number of I2C Channels

2

Typical Operating Supply Voltage

4.2 → 5.5 V

Number of CAN Channels

0

Number of UART Channels

0

Number of USART Channels

2

Minimum Operating Temperature

-40 °C

Height

1.05mm

Instruction Set Architecture

RISC

Number of ADC Units

1

ADCs

16 x 10 bit

Length

12mm

Dimensions

12 x 12 x 1.05mm

Width

12mm

Number of LIN Channels

0

Maximum Operating Temperature

+85 °C

Pulse Width Modulation

2 (CCP), 3 (ECCP)

Number of PCI Channels

0

Number of Ethernet Channels

0

Program Memory Type

Flash

PIC18F8527/8622/8627/8722 8-Bit Microcontrollers


The PIC18F Microcontrollers from Microchip are the most capable 8-bit devices within Microchip’s offer. Available within the range is CAN, LIN and Ethernet capability as part of a comprehensive range of peripherals to meet the needs of embedded applications and versions featuring XLP (Extreme Low-Power) Technology for where power consumption is a key consideration.

The Microchip PIC18F8527/8622/8627/8722 family of Microcontrollers are 8-bit devices based upon Microchip’s PIC18 architecture and includes XLP (eXtreme Low Power) technology.

Microcontroller Features


C Compiler Optimized Architecture
Self-Programmable under Software Control
Priority Levels for Interrupts
8 x 8 Single-Cycle Hardware Multiplier
In-Circuit Serial Programming™ (ICSP™) via Two Pins
In-Circuit Debug (ICD) via Two Pins
Wide Operating Voltage Range: 2.0V to 5.5V
Programmable Brown-out Reset (BOR) with Software Enable Option
Extended Watchdog Timer (WDT)
Flexible Oscillator Structure

Power Management Features


Run: CPU On, Peripherals On
Idle: CPU Off, Peripherals On
Sleep: CPU Off, Peripherals Off
Ultra Low 50 nA Input Leakage
Run mode Currents Down to 25 μA Typical
Idle mode Currents Down to 6.8 μA Typical
Sleep mode Current Down to 120 nA Typical
Timer1 Oscillator: 900 nA, 32 kHz, 2V
Watchdog Timer: 1.6 μA, 2V Typical
Two-Speed Oscillator Start-up

Peripheral Features


High-Current Sink/Source 25 mA/25 mA
Three Programmable External Interrupts
Four Input Change Interrupts
Three Enhanced Capture/Compare/PWM (ECCP) modules
Two Capture/Compare/PWM (CCP) modules
Master Synchronous Serial Port (MSSP) module - supports 3-Wire SPI (all 4 modes) and I2C™
Enhanced Addressable USART module block (no external crystal required)
10-Bit Analogue-to-Digital Converter – 12 or 16 channels depending on model
Dual Analogue Comparators with Input Multiplexing
Programmable 16-Level High/Low-Voltage Detection (HLVD) module

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들