Microchip, 8bit PIC, PIC16F Microcontroller, 32MHz, 8192 words Flash, 28-Pin SOIC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 pack of 5 units)*

₩13,235.20

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 300 개 unit(s)이 배송 준비 됨
수량
한팩당
한팩당*
5 +₩2,647.04₩13,235.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
829-0103
제조사 부품 번호:
PIC16F1716-I/SO
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Family Name

PIC16F

Package Type

SOIC

Mounting Type

Surface Mount

Pin Count

28

Device Core

PIC

Data Bus Width

8bit

Program Memory Size

8192 words

Maximum Frequency

32MHz

RAM Size

1.024 kB

USB Channels

0

Number of PWM Units

2 x 8/10 bit

Number of SPI Channels

1

Typical Operating Supply Voltage

2.3 → 5.5 V

Number of USART Channels

1

Number of I2C Channels

1

Number of UART Channels

1

Number of CAN Channels

0

ADCs

25 x 10 bit

Instruction Set Architecture

RISC

Maximum Operating Temperature

+85 °C

Program Memory Type

Flash

Minimum Operating Temperature

-40 °C

Length

17.9mm

Maximum Number of Ethernet Channels

0

Number of ADC Units

1

Dimensions

17.9 x 7.5 x 2.35mm

Pulse Width Modulation

1 (2 x 8 bit), 1 (2 x 10 bit)

Number of PCI Channels

0

Height

2.35mm

Number of LIN Channels

1

Number of Ethernet Channels

0

Width

7.5mm

PIC16F170x/171x, 8-Bit Flash Microcontrollers


PIC16F170x/171x microcontrollers combine Intelligent Analog integration with low-cost and eXtreme
Low Power (XLP) to suit a variety of cost-sensitive general purpose applications.

Intelligent Analog: Up to two op amps, up to two high-speed comparators, up to 28 input channels of 10-bit ADC and up to one 5-bit/8-bit DAC.
Configurable Logic Cell (CLC): Create custom combinational and sequential logic using the configurable logic cell module. External gates and state functions can also be brought into the MCU itself.
Numerically Controlled Oscillator (NCO): Frequency output adjustable with very fine steps. The NCO provides high-resolution oscillator capabilities for control applications such as lighting ballast, radio and tone generators.
Complementary Output Generator (COG): Provides a complementary waveform with rising and falling edge dead band control, enabling high-efficiency synchronous switching with no processor overhead. The COG also incorporates auto-shutdown and auto-restart and can directly interface with other peripherals/external inputs. Additionally it incorporates blanking and phase control.
Zero Cross Detect (ZCD): AC high-voltage zero crossing detection simplifies Triac control, synchronized switching control and timing.
Peripheral Pin Select (PPS): Configure any digital peripheral to any pin via an internal multiplexer to ensure layout flexibility and the elimination of pin overlap.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들