Microchip ATTINY3227-MU, 16 bit AVR CPU, ATTINY3227 Microcontroller, 20 MHz, 32kB FLASH, 24-Pin VQFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal 50 units (supplied in a tray)*

₩89,676.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 22일 부터 440 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
50 - 90₩1,793.52
100 - 140₩1,757.80
150 - 480₩1,722.08
490 +₩1,688.24

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
234-3723P
제조사 부품 번호:
ATTINY3227-MU
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Series

ATTINY3227

Product Type

Microcontroller

Package Type

VQFN

Pin Count

24

Device Core

AVR CPU

Data Bus Width

16bit

Program Memory Size

32kB

Maximum Clock Frequency

20MHz

RAM Size

3kB

Maximum Supply Voltage

5.5V

Maximum Expanded Memory Size

32kB

Analogue Comparators

1

Minimum Operating Temperature

-40°C

Number of Programmable I/Os

22

Maximum Operating Temperature

125°C

Standards/Approvals

RoHS

Minimum Supply Voltage

1.8V

ADCs

12 bit

Instruction Set Architecture

Harvard

Automotive Standard

AEC-Q100

Number of Timers

4

Program Memory Type

FLASH

The Microchip ATTINY3227-MU microcontroller of the tinyAVR® 2 family use the AVR® CPU with hardware multiplier, running at 20 MHz, with 32 KB Flash, 3 KB of SRAM and 256B of EEPROM available in a 24-pin package. The family uses the latest technologies from Microchip with a flexible and low-power architecture including an event system, Advanced digital peripherals and accurate analog features such as a 12-bit differential ADC with Programmable Gain Amplifier (PGA).

High-performance low-power AVR® CPU

Single-cycle I/O access

Two-level interrupt controller with vectored interrupts

Two-cycle hardware multiplier

Supply voltage ranges between 1.8V to 5.5V

32B of user row in non volatile memory that can keep data during chip-erase and be programmed while the device is locked

Write/erase endurance

Flash 10, 000 cycles

EEPROM 100, 000 cycles

Data retention: 40 years at 55°C

Power-on Reset (POR)

Brown-out Detection (BOD)

32.768 kHz Ultra-Low Power (ULP) internal oscillator

32.768 kHz external crystal oscillator

Single-pin Unified Program and Debug Interface (UPDI)

Three sleep modes

Idle with all peripherals running and immediate wake-up time

Standby with configurable operation of selected peripherals

Power-Down with full data retention

Host/Client Serial Peripheral Interface (SPI)

Host/Client Two-Wire Interface (TWI) with dual address match

Automated Cyclic Redundancy Check (CRC) flash memory scan

Watchdog Timer (WDT) with Window Mode, with a separate on-chip oscillator

-40°C to 85°C (industrial temperature)

-40°C to 125°C (extended temperature)