Microchip, 8 bit 8051, AT89S51 Microcontroller, 20 MHz, 8kB FLASH, 44-Pin 44A

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal 40 units (supplied in a tray)*

₩120,395.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 260 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
40 - 75₩3,009.88
80 +₩2,949.72

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
199-5363P
제조사 부품 번호:
AT89S51-24AU
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Series

AT89S51

Product Type

Microcontroller

Package Type

44A

Mount Type

Surface

Pin Count

44

Device Core

8051

Data Bus Width

8bit

Program Memory Size

8kB

Interface Type

UART, SPI

Maximum Clock Frequency

20MHz

RAM Size

128bit

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Number of Programmable I/Os

32

Maximum Operating Temperature

85°C

Length

10mm

Height

1mm

Standards/Approvals

RoHS

Width

10 mm

Minimum Supply Voltage

4V

ADCs

0 bit

Instruction Set Architecture

MCS-51

Number of Timers

2

Automotive Standard

No

Program Memory Type

FLASH

The Microchip AT89S51 8-bit microcontroller has 4Kbytes of In-System Programmable Flash memory. It operates at 4V to 5.5V power supply. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional non-volatile memory programmer. By combining a versatile 8-bit CPU with In-System Programmable Flash on a monolithic chip, the Atmel AT89S51 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications. It features 4K bytes of Flash, 128 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers, two 16-bit timer/counters, a five-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. It is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power down mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next external interrupt or hardware reset.

4K Bytes of In-System Programmable (ISP) Flash Memory

Three-level Program Memory Lock

Fully static operation

Three-level Program Memory Lock

128 x 8-bit Internal RAM

32 Programmable I/O Lines

Two 16-bit Timer/Counters

Six Interrupt Sources

Full Duplex UART Serial Channel

Low-power Idle and Power-down Modes

Interrupt Recovery from Power-down Mode

Watchdog Timer

Dual Data Pointer

Power-off Flag

Fast Programming Time

Flexible ISP Programming (Byte and Page Mode)