Microchip, 16 bit 16 Bit CPU, PIC24FJ Microcontroller, 32 MHz, 1MB FLASH, 64-Pin QFP

대량 구매 할인 기용 가능

Subtotal (1 tray of 160 units)*

₩1,321,715.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 320 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tray*
160 - 640₩8,260.72₩1,321,805.44
800 +₩8,095.28₩1,295,335.04

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
146-3253
제조사 부품 번호:
PIC24FJ1024GB606-I/PT
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Microcontroller

Series

PIC24FJ

Package Type

QFP

Mount Type

Surface

Pin Count

64

Device Core

16 Bit CPU

Data Bus Width

16bit

Program Memory Size

1MB

Maximum Clock Frequency

32MHz

RAM Size

32kB

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

-40°C

Analogue Comparators

3

Maximum Operating Temperature

85°C

Width

9 mm

Height

0.85mm

Standards/Approvals

No

Length

9mm

Minimum Supply Voltage

2V

Program Memory Type

FLASH

Automotive Standard

No

Number of Timers

7

Instruction Set Architecture

C Compiler

ADCs

16 x 10/12 Bit

The Microchip PIC24FJ1024GB606 microcontroller has C compiler optimized instruction Set architecture with large, dual partition flash program memory and USB On-The-Go (OTG). It includes up to 1MB of Flash memory with Error Correction Code (ECC) ,32 KB of RAM and USB connectivity. It operates on 2V to 3.6V voltage range. This device also features dual-partition Flash with Live Update capability, enabling them to hold two independent software applications, permitting simultaneous programming of one partition while executing application code from the other. It has 1024 flash program memory and 32K.data memory.

Up to 16 MIPS Operation @ 32 MHz

Two Address Generation Units for Separate Read and Write Addressing of Data Memory

10,000 Erase/Write Cycle Endurance, Typical

Data Retention of 20 Years Minimum

Self-Programmable under Software Control

On-Chip Voltage Regulators (1.8V) for Low-Power Operation

Programmable Reference Clock Output

In-Circuit Serial Programming™ (ICSP™) and In-Circuit Emulation (ICE) via Two Pins

JTAG Boundary Scan Support

Detects clock failure and switches to on-chip, low-power RC Oscillator

Power-on Reset (POR), Brown-out Reset (BOR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

Programmable High/Low-Voltage Detect (HLVD)

Flexible Watchdog Timer (WDT) with its Own RC Oscillator for Reliable Operation

Sleep and Idle modes Selectively Shut Down

Peripherals and/or Core for Substantial Power

Reduction and Fast Wake-up

Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals

Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction

Wide Range Digitally Controlled Oscillator (DCO) for Fast Start-up and Low-Power Operation

USB v2.0 On-The-Go (OTG) Compliant

Dual Role Capable – Can Act as Either Host or Peripheral

Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s)

USB Operation in Host mode

Full-Speed USB Operation in Device mode

High-Precision PLL for USB

USB Device mode Operation from FRC Oscillator – No Crystal Oscillator Required

Temperature range between 40°C to +85°C

TQFP (Plastic Thin Quad Flatpack) package

관련된 링크들