Microchip ATSAM3A8CA-AU, 32 bit ARM Cortex M3, Atmega Microcontroller, 20 MHz, 512kB FLASH, 100-Pin LQFP
- RS 제품 번호:
- 131-0378
- 제조사 부품 번호:
- ATSAM3A8CA-AU
- 제조업체:
- Microchip
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
- RS 제품 번호:
- 131-0378
- 제조사 부품 번호:
- ATSAM3A8CA-AU
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Series | Atmega | |
| Product Type | Microcontroller | |
| Package Type | LQFP | |
| Mount Type | Surface | |
| Pin Count | 100 | |
| Device Core | ARM Cortex M3 | |
| Data Bus Width | 32bit | |
| Interface Type | 2 Wire I2C, SPI, USART | |
| Program Memory Size | 512kB | |
| Maximum Clock Frequency | 20MHz | |
| RAM Size | 96kB | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Number of Programmable I/Os | 23 | |
| Analogue Comparators | 1 | |
| Height | 1.45mm | |
| Width | 14 mm | |
| Standards/Approvals | RoHS | |
| Length | 14mm | |
| Minimum Supply Voltage | 1.8V | |
| Number of Timers | 1 | |
| Program Memory Type | FLASH | |
| ADCs | 16 x 12 Bit | |
| Automotive Standard | No | |
| Instruction Set Architecture | RISC | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Series Atmega | ||
Product Type Microcontroller | ||
Package Type LQFP | ||
Mount Type Surface | ||
Pin Count 100 | ||
Device Core ARM Cortex M3 | ||
Data Bus Width 32bit | ||
Interface Type 2 Wire I2C, SPI, USART | ||
Program Memory Size 512kB | ||
Maximum Clock Frequency 20MHz | ||
RAM Size 96kB | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Number of Programmable I/Os 23 | ||
Analogue Comparators 1 | ||
Height 1.45mm | ||
Width 14 mm | ||
Standards/Approvals RoHS | ||
Length 14mm | ||
Minimum Supply Voltage 1.8V | ||
Number of Timers 1 | ||
Program Memory Type FLASH | ||
ADCs 16 x 12 Bit | ||
Automotive Standard No | ||
Instruction Set Architecture RISC | ||
SMART SAM3A ARM® Cortex-M3 Microcontrollers
Based on the ARM® Cortex®-M3 core, the Atmel® SMART SAM3A Flash microcontroller (MCU) is optimized for CAN connectivity and includes a high-speed USB (HS USB) MiniHost and device with on-chip physical layer (PHY). The series also includes QTouch capacitive touch support, enhanced safety and security and low power consumption.