Microchip ATMEGA32U2-AU, 8 bit AVR, ATMEGA32U2 Microcontroller, 16 MHz, 32kB FLASH, 32-Pin TQFP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 pack of 2 units)*

₩13,272.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 20 개 단위 배송 준비 완료
  • 추가로 2025년 12월 24일 부터 334 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
2 - 8₩6,636.40₩13,272.80
10 - 22₩6,504.80₩13,009.60
24 - 98₩6,373.20₩12,746.40
100 +₩6,241.60₩12,483.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
131-0287
제조사 부품 번호:
ATMEGA32U2-AU
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Microcontroller

Series

ATMEGA32U2

Package Type

TQFP

Mount Type

Surface

Pin Count

32

Device Core

AVR

Data Bus Width

8bit

Interface Type

SPI, USART

Program Memory Size

32kB

Maximum Clock Frequency

16MHz

RAM Size

1kB

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Analogue Comparators

1

Number of Programmable I/Os

22

Maximum Operating Temperature

85°C

Length

7mm

Width

7 mm

Height

1.05mm

Standards/Approvals

No

Minimum Supply Voltage

2.7V

Automotive Standard

No

ADCs

0 bit

Program Memory Type

FLASH

Distrelec Product Id

304-37-096

Instruction Set Architecture

RISC

Number of Timers

2

The Microchip ATmega32U2 CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It operates on 2.7V to 5.5V voltage range. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 32Kbytes of In-System Programmable Flash with Read-While-Write capabilities, 1024 bytes EEPROM, 1024 bytes SRAM 22 general purpose I/O lines, 32 general purpose working registers, two flexible Timer/Counters with compare modes and PWM, one USART, a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, debugWIRE interface, also used for accessing the On-chip Debug system and programming and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next interrupt or hardware reset.

Up to 16 MIPS Throughput at 16 MHz

In-System Programming by on-chip Boot Program hardware-activated after reset

Programming lock for software security

USB 2.0 Full-speed device module with interrupt on transfer completion

Microcontroller reset on USB Bus Reset without detach

USB Bus Disconnection on Microcontroller Request

One 8-bit Timer/Counters with Separate Prescaler and Compare Mode (two 8-bit PWM channels)

One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Mode (three 8-bit PWM channels)

Master/Slave SPI Serial Interface

Programmable watchdog timer with separate on-chip oscillator

On-chip analog comparator

Interrupt and wake-up on pin change

Power-On Reset and programmable brown-out detection

Internal calibrated oscillator

External and internal Interrupt sources

QFN32 (5x5mm) / TQFP32 package

관련된 링크들