ADAFRUIT INDUSTRIES Feather M0 Bluefruit LE MCU Development Board 2995

본 제품군 열람하기

Subtotal (1 unit)*

₩49,124.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
  • 추가로 2026년 4월 09일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩49,124.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
124-5516
Distrelec 제품 번호:
300-91-208
제조사 부품 번호:
2995
제조업체:
ADAFRUIT INDUSTRIES
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

ADAFRUIT INDUSTRIES

Product Type

Development Board

Kit Classification

Development Board

Kit Name

Feather M0 Bluefruit LE

Technology

MCU

Processor Family Name

SAM

Processor Part Number

ATSAMD21G18

Processor Type

Microcontroller

Standards/Approvals

RoHS

COO (Country of Origin):
US

ADAFRUIT INDUSTRIES MCU Development Board


The ADAFRUIT INDUSTRIES MCU development board has all the basic features shared by all the Feather M0 range boards with a built-in Bluetooth low energy module (BLE). It uses the Bluefruit LE module and has two status indicator LEDs. It has an nRF51822 chipset from Nordic Semiconductor, programmed with multi-function code that opens up a huge range of options. There is a built-in battery charging circuit that enables you to measure and monitor battery levels. It has a standard UART receive/transmit profile and AT command set to have full control over your device. This chip also has a built-in USB port with USB-to-serial programming and debug capability so no need for an FTDI-like chip. The development board is especially designed for low power portable projects.

Features and Benefits


256KB flash and 32KB RAM (No EEPROM)

32.768kHz crystal for clock generation and RTC

3.3V regulator with 500mA peak current output

USB native support, comes with USB bootloader and serial port debugging

20 GPIO pins

Dedicated connector for 3.7 V lithium batteries

Communication protocols like hardware serial, hardware I²C and hardware SPI support

PWM outputs on all pins

6 x 12-bit analogue inputs

1 x 10-bit analogue output (DAC)

Built-in 100mA LiPo charger with charging status indicator LED

Pin #13 red LED for general purpose blinking

Power/ enable pin

4 mounting holes

Reset button

Applications


Embedded development

Educational institutions

Robotics

Internet of things

Human machine interface

Electronics laboratories

Automation

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

관련된 링크들