RS PRO Tool Steel Rectangular Bar, 20mm W, 3mm H, 500mm L
- RS 제품 번호:
- 682-113
- 제조업체:
- RS PRO
가격 개당**
Was ₩41,779.92
귀하의 지불
₩32,650.80
5 <재고있음> 5-9영업일내 홍콩 발송*
* 배송 날짜는 선택한 수량과 배송 주소에 따라 달라질 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩32,650.80 |
**다른 단위에 대한 가격 표시
- RS 제품 번호:
- 682-113
- 제조업체:
- RS PRO
- COO (Country of Origin):
- GB
RS PRO Steel Rectangular Bar (Ground Flat Stock)
A high-quality tool Steel with has been precision ground to close tolerances for a defect and carburisation free rectangular bar.
The Steel stock has been fully annealed and can reach a high level of hardness on top of which the precision grinding to close tolerances enables finished components to be produced with minimum machining.
The ground flat bar features excellent dimensional stability and resistance to wear making it ideal for use in applications including gauges, punches, dies, jigs, templates, cam and machine parts.
Tolerance
Width: -0.000 +0.127 mm; Thickness: -0.000 +0.050 mm
- 500 x 20 x 3 mm
- Annealed and free from Carburisation
- Suitable for hardening
- Excellent dimensional stability
Standards and Approvals: Conforms to BS4659: 1971 BO1
What is Ground Flat Stock (GFS)?
Ground Flat Stock (often referred to as Gauge Stock) is a precision ground Steel alloy resulting in close tolerances and bright clean edges free from carburisation or any surface defects. Ground Flat Stock is available in many different forms including sheets, strips, shim stock and square to name a few.
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Standards
BS 4659: 1971 BO1
속성 | 값 |
|---|---|
| Form | Rectangular Bar |
| Material | Tool Steel |
| Length | 500mm |
| Width | 20mm |
| Height | 3mm |
| Tensile Strength | <540 Mpa |
| Hardness | 201 to 255 HB |
| Density | 7.85g/cm³ |
| Suitability | Gauges, Punches, Dies, Jigs, Templates, Cams and Machine Parts |
| Thermal Conductivity | 37.5W/mK |