RS PRO Phosphor Bronze Rod 1 1/2in Diameter, 13in L
- RS 제품 번호:
- 110-090
- 제조업체:
- RS PRO
3 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당
₩498,194.243
| 수량 | 한팩당 |
| 1 - 5 | ₩498,194.243 |
| 6 - 29 | ₩478,264.748 |
| 30 + | ₩393,611.831 |
- RS 제품 번호:
- 110-090
- 제조업체:
- RS PRO
제정법과 컴플라이언스
- COO (Country of Origin):
- GB
제품 세부 사항
RS PRO Phosphor Bronze Rod, 13 in x 1.5 in
Need to fabricate heavy load gear or mend a worm wheel? This RS PRO phosphor bronze rod will do the job. It has a 1.5-inch diameter and a 420 N/mm² tensile strength, so it's strong and well-suited for heavy-duty tasks.
The rod is 13 inches long, which is enough material for a small to medium-sized project. If you need smaller sizes, the phosphor bronze material is easy to cut. The material also offers good resistance to corrosion, which means it won't degrade easily, even if used outdoors.
This product meets Restriction of Hazardous Substances (RoHS) standards, meaning it contains only minimal amounts of any harmful materials. Engineers have thoroughly tested this product to ensure quality and reliability.
The rod is 13 inches long, which is enough material for a small to medium-sized project. If you need smaller sizes, the phosphor bronze material is easy to cut. The material also offers good resistance to corrosion, which means it won't degrade easily, even if used outdoors.
This product meets Restriction of Hazardous Substances (RoHS) standards, meaning it contains only minimal amounts of any harmful materials. Engineers have thoroughly tested this product to ensure quality and reliability.
Features and Benefits
- Density of 8.8 g/cm³
- Rod form
- Hardness of 120 HB
- Rod diameter of 1.5 in
- Rod length of 13 in
- Phosphor bronze material
- Suitable for bearings, heavy load gear, pumps, valves and worm wheels
- Tensile strength of 420 N/mm²
- Thermal conductivity of 47 W/mK
- Meets British BS1400: 1985: PBI Concast standards
Standards
BS1400: 1985: PBI Concast
사양
속성 | 값 |
|---|---|
| Form | Rod |
| Material | Phosphor Bronze |
| Length | 13in |
| Rod Diameter | 1 1/2in |
| Tensile Strength | 420 N/mm² |
| Hardness | 120 HB |
| Suitability | Bearings, Heavy Load Gears, Pumps, Valves, Worm Wheels |
| Density | 8.8g/cm³ |
| Thermal Conductivity | 47W/mK |