최근 검색 기록

    RawlPlug Steel Masonry Anchor M8 x 80mm, 10mm fixing hole

    RS 제품 번호:
    378-5502
    제조사 부품 번호:
    R-RLK-L-08080
    제조업체:
    RawlPlug
    RawlPlug
    모든 Masonry Bolts & Anchors 열람하기
    19 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    Box(es)

    추가완료!

    단가 1 Box of 50

    ₩83,083.10

    Box(es)Per Box한팩당*
    1 +₩83,083.10₩1,661.60
    *다른 단위에 대한 가격 표시
    RS 제품 번호:
    378-5502
    제조사 부품 번호:
    R-RLK-L-08080
    제조업체:
    RawlPlug

    해당 안됨

    COO (Country of Origin):
    TW

    제정법과 컴플라이언스

    해당 안됨

    COO (Country of Origin):
    TW

    제품 세부 사항

    Rawlok™ - Loose Bolt Sleeve Anchors


    All purpose expansion anchor for use in medium weight applications in brickwork, blockwork and hard masonry. Suitable for installing signs, joist hangers, wall plates, handrails, shelves etc. Through fixing allows drilling through pre-positioned fixture. Manufactured from zinc-plated steel for good corrosion resistance.


    Features and Benefits.


    • R-RLK-L Rawlok Expansion Anchor Plug.

    • Loose Bolt.

    • All purpose.

    • Medium weight anchor applications.

    • Maximum performance in most base material.

    • Integral collapse feature (ensures maximum clamping force).

    • Bolt and drill size marked on the Expansion anchor bolt sleeve.


    Typical Anchor Plug Masonry Fixings Applications.


    • Radiators.

    • Signs.

    • Stadium seating.

    • Satellite dishes.

    • Wall plates.

    • Shutters.

    • Garage doors.


    Material the R-RLK-L Rawlok Expansion Anchor Plug is Compatible with?


    • Non-cracked concrete (C20/25-C50/60 Approval).

    • Solid brick.

    • Reinforced concrete.


    R-RLK-L Rawlok Expansion Anchor Plug Fixings Available?


    • Stock number 8192706, M8, steel, Shield Anchor loose bolt, 10 mm x 60 mm.

    • Stock number 3785524, M10, steel, Shield Anchor loose bolt, 10 mm x 70 mm.

    • Stock number 3785518, M10, steel, Shield Anchor loose bolt, 10 mm x 60 mm.

    • Stock number 3785502, M8, steel, Shield Anchor loose bolt, 10 mm x 80 mm.


    How to use the R-RLK-L Rawlok Expansion Anchor Plug?


    • Drill a hole (have pre-drilled hole ready) ensure that it is the correct diameter and depth needed.

    • Special note: If fixing into brickwork avoid all mortar joint areas.

    • Clean out the drilled hole removing all debris and dust (important to thoroughly remove everything).

    • Insert the Rawlok through the fixture into the pre-drilled hole.

    • Tighten the fixing (screw) carefully, only to the recommended torque.


    What is an Expansion Anchor?


    An expansion anchor is a fixing which is mainly used in a solid base material that when fixed in place gives you the fixing required through the expansion of the anchor. A pre-expanded anchor is simply inserted into a drilled hole and when tightened exerts pressure (expansion within the hole to provide a solid fixing).
    An un-expanded anchor requires the anchor to be set once installed into the drilled hole.



    사양

    속성
    Thread SizeM8
    TypeShield Anchor Loose Bolt
    Length80mm
    Fixing Hole Diameter10mm
    Maximum Fixing Thickness35mm
    MaterialSteel
    19 <재고있음> 5-9영업일내 홍콩 발송
    Add to Basket
    Box(es)

    추가완료!

    단가 1 Box of 50

    ₩83,083.10

    Box(es)Per Box한팩당*
    1 +₩83,083.10₩1,661.60
    *다른 단위에 대한 가격 표시