The Sick V200 series work station extended is a single beam safety camera system having 2.12m maximum range for scanning. It has a supply voltage of 24VDC and switching current which ranges between 6mA and 250mA. This system has a male connector M12 with 8-pin as the connection type and the status and diagnostic display are shown by the LEDs. The housing material of the camera system is die-cast aluminium. The optics used have a wide aperture angle, the invisible LED light beam in combination with the reflector ensures robust monitoring that is resistant to environmental factors. Supplied with teaching pen, operating instructions on CD-ROM and Quickstart (instructions for quick commissioning.) Note: A resolution set has to be ordered separately
Features and Benefits
Simple to install, no specialist knowledge or configuration software needed Intuitive one-button set up No blind spots Peak wavelength is 850nm One system fits all protective field sizes Components and the evaluation unit are integrated into a single compact housing Sensor can handle tolerances of several centimetres along the optical axis Flexible protective field geometries Automatic alignment Restart/reset, EDM integrated 2 x 250mA switching outputs 1 x EDM input, 1 x restart interlock input, 1 x teach/sync input Response time is 20ms Operating temperature ranges between 0°C and 50°C
Applications
Machine safeguarding Mining and Quarrying Factory automation industry Pharmaceutical industry Rail and transport
Certifications
CE certified cULus certified IP54 (enclosure) rated IEC 61496 IEC 61508 EN 62061 EN ISO 13849 EN ISO 13849 EN 50178 EN 60068-2-6 EN 60068-2-27
