- RS 제품 번호:
- 252-3650P
- 제조사 부품 번호:
- L99LDLH32TR
- 제조업체:
- STMicroelectronics
현재 시스템 에러로 재고 수량 확인이 불가합니다. krenquiry@rs-components.com 에 문의하시거나 잠시후에 다시 시도해주시기 바랍니다.
추가완료!
단가 개당(릴로 공급됨) 150pcs 이하는 STRIP 포장
₩11,379.165
수량 | 한팩당 |
10 - 99 | ₩11,379.165 |
100 - 249 | ₩11,153.203 |
250 - 499 | ₩10,923.792 |
500 + | ₩10,711.629 |
- RS 제품 번호:
- 252-3650P
- 제조사 부품 번호:
- L99LDLH32TR
- 제조업체:
- STMicroelectronics
제정법과 컴플라이언스
제품 세부 사항
The STMicroelectronics 32 channels LED driver with Automotive CAN FD Light interface is a monolithic 32-channel linear current regulator specifically designed for automotive exterior O/LED rear lighting applications. Thanks to the high side configuration of the output channels, the L99LDLH32 is suitable to drive OLED panel with common cathode. It guarantees up to 35 V output driving capability - to cover the OLED forward voltage wide spread - and features 32 regulated current sources able to provide from 1 mA up to 15 mA individually programmable current to drive each pixel of the OLED panel independently. As the other device in the family (L99LDLL16).
AEC-Q100 qualified
CAN FD light compatible serial interface, protocol handler, draft specification proposal (DSP) available from CAN in automation (CiA)
High precision oscillator integrated, no external quartz required
QFN48L 7x7 with exposed pad
Timeout watchdog with limp home
Low standby current
Stand alone/fail safe and bus mode operation
Direct drive (1 direct input), for 1 function group supporting ASIL requirements
Widest configurability by embedded non-volatile and volatile memories
Operating supply voltage range5.5 V – 40 V
CAN FD light compatible serial interface, protocol handler, draft specification proposal (DSP) available from CAN in automation (CiA)
High precision oscillator integrated, no external quartz required
QFN48L 7x7 with exposed pad
Timeout watchdog with limp home
Low standby current
Stand alone/fail safe and bus mode operation
Direct drive (1 direct input), for 1 function group supporting ASIL requirements
Widest configurability by embedded non-volatile and volatile memories
Operating supply voltage range5.5 V – 40 V
the L99LDLH32 integrates a robust purely automotive CAN FD Light compatible communication interface which allows a high rate data transmission (up to 1 Mbit/s) and uses CAN FD structure for long frames. Besides the CAN FD Light compatible physical layer, the device also integrates the protocol handler, so no additional external devices are needed to facilitate communication with Commander ECU. The L99LDLH32 can operate in bus mode using CAN FD Light compatible interface or in stand-alone/fail-safe mode using internal Few Time Programmable (FTP) memory registers.