- RS 제품 번호:
- 615-0959
- 제조업체:
- RS PRO
- RS 제품 번호:
- 615-0959
- 제조업체:
- RS PRO
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- CN
제품 세부 사항
Carbide Brazed Tip Turning Tools
A selection of carbide tipped brazed turning tools manufactured in 2 standard grades
P30 - Blue - A general purpose grade for small workshops where a variety of steels are machined. Suitable for roughing of steel and castings using moderate feeds and moderate to low cutting speeds
K20 - Red - For finishing and light roughing of cast iron and other short chip materials using fine to moderate feeds and moderate to high cutting speeds
Also suitable for milling operations
All dimensions are approximate
P30 - Blue - A general purpose grade for small workshops where a variety of steels are machined. Suitable for roughing of steel and castings using moderate feeds and moderate to low cutting speeds
K20 - Red - For finishing and light roughing of cast iron and other short chip materials using fine to moderate feeds and moderate to high cutting speeds
Also suitable for milling operations
All dimensions are approximate
Note
Parting off tools are ISO 7
Cranked Knife tools are ISO 3 except 615-0915 which is ISO 6
Cranked Knife tools are ISO 3 except 615-0915 which is ISO 6
사양
속성 | 값 |
---|---|
Lathe Part | Lathe Tool Bit |
Type | Single Ended |
Overall Length | 125 mm |
Rake Angle | 5° |
Material | Carbide Brazed Tip |
Grade | K20 |
Thickness | 20mm |