ACPL-C780-000E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V SOIC
- RS 제품 번호:
- 693-5961P
- 제조사 부품 번호:
- ACPL-C780-000E
- 제조업체:
- Broadcom
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 10 units (supplied in a tube)*
₩139,684.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 10 - 49 | ₩13,968.40 |
| 50 + | ₩13,291.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 693-5961P
- 제조사 부품 번호:
- ACPL-C780-000E
- 제조업체:
- Broadcom
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 1 | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Isolation Type | Miniature Isolation Amplifiers | |
| Minimum Operating Temperature | 85°C | |
| Vos - Input Offset Voltage | 2 mV | |
| Maximum Operating Temperature | -40°C | |
| Length | 5.85mm | |
| Standards/Approvals | No | |
| Series | ACPL-C780 | |
| Height | 3.18mm | |
| Width | 6.81 mm | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 1 | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 8 | ||
Isolation Type Miniature Isolation Amplifiers | ||
Minimum Operating Temperature 85°C | ||
Vos - Input Offset Voltage 2 mV | ||
Maximum Operating Temperature -40°C | ||
Length 5.85mm | ||
Standards/Approvals No | ||
Series ACPL-C780 | ||
Height 3.18mm | ||
Width 6.81 mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers