FTDI Chip USB Type A to Receptacle x 10, Single Pole Converter Cable

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩71,440.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 4월 13일 부터 61 개 단위 배송
  • 추가로 2026년 7월 09일 부터 100 개 단위 배송
  • 추가로 2026년 8월 19일 부터 100 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩71,440.00
5 +₩68,582.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
741-7076
Distrelec 제품 번호:
304-01-762
제조사 부품 번호:
C232HM-DDHSL-0
제조업체:
FTDI Chip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FTDI Chip

Product Type

Converter Cable

Connector Type A

USB Type A

Transmission Speed

30Mbps

Transmission Length

0.5m

Connector Type B

Receptacle x 10, Single Pole

Nominal Supply Voltage

3.3 V

Number of Connectors B

10

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Depth

42.5mm

Height

16mm

Standards/Approvals

RoHS, FCC, CE

FTDI Chip USB To MPSSE Cable


The FTDI Chip 500mm USB to MPSSE cable contains a small internal electronic circuit board, utilising the FTDI FT232H. It is encapsulated into the USB connector at the end of the cable to handle all the USB signalling and protocols. The cable provides a fast and simple way to connect devices with 3.3VDC digital interfaces to the USB. The integrated FT232H device incorporates a command processor called the Multi-Protocol Synchronous Serial Engine (MPSSE). The purpose of the MPSSE command processor is to communicate with devices that use synchronous protocols (such as JTAG, SPI, or I2C) efficiently. The cable is terminated by ten individual wires with single pole connectors that can be interfaced to a male header.

Features and Benefits


Connector A is male USB

Connector B is female receptacle

USB 2.0 Hi-speed (480Mbps) and full speed (12Mbps) compatible

Maximum output current rating is 250mA at 3.3VDC on VCC

1kB receive and transmit buffers for high data throughput

Adjustable receive buffer timeout

Entire USB protocol handled on the chip – No USB-specific firmware programming required

Fully assisted hardware or X-ON/ X-OFF software handshaking

Low operating and USB suspend current low USB bandwidth consumption

Support for USB suspend and resume

Synchronous serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI, and I²C

Transmit and receive LED drive signals

UHCI/ OHCI/ EHCI host controller compatible

USB bus powered

USB type A connector for direct connection to a host or hub

Operating temperature ranges between -40 and 85°C

Applications


Automation systems

Electronic devices

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

FCC certified

CE certified

UL2464 approved

관련된 링크들