STMicroelectronics STGIPQ4C60T-HZ IGBT, 6 A 600 V, 26-Pin N2DIP-26L type Z

모든 IGBTs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tube of 15 units)*

₩186,486.60

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 8월 06일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tube*
15 - 15₩12,432.44₩186,496.00
30 - 45₩12,060.20₩180,893.60
60 +₩11,697.36₩175,460.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
218-4824
제조사 부품 번호:
STGIPQ4C60T-HZ
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Maximum Continuous Collector Current

6 A

Maximum Collector Emitter Voltage

600 V

Maximum Gate Emitter Voltage

600V

Number of Transistors

6

Maximum Power Dissipation

12.5 W

Package Type

N2DIP-26L type Z

Pin Count

26

Transistor Configuration

Series

SLLIMM nano 2nd series IPM, 3-phase inverter, 6 A, 600 V, short-circuit rugged IGBT


This second series of SLLIMM (small low-loss intelligent molded module) nano provides a compact, high-performance AC motor drive in a simple, rugged design. It is composed of six improved short-circuit rugged trench gate fieldstop IGBTs with freewheeling diodes and three half-bridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is designed to allow a better and more easily screwed-on heat sink, and is optimized for thermal performance and compactness in built-in motor applications or other low power applications where assembly space is limited. This IPM includes a completely uncommitted operational amplifier and a comparator that can be used to design a fast and efficient protection circuit.

  • IPM 6 A, 600 V, 3-phase IGBT inverter bridge including 3 control ICs for gate driving and freewheeling diodes

  • 3.3 V, 5 V, 15 V TTL/CMOS input comparators with hysteresis and pull-down/pull-up resistors

  • Internal bootstrap diode

  • Optimized for low electromagnetic interference

  • Undervoltage lockout

  • Short-circuit rugged TFS IGBT

  • Shutdown function

  • Interlocking function

  • Op-amp for advanced current sensing

  • Comparator for fault protection against overcurrent

  • Isolation ratings of 1500 Vrms/min.

  • NTC (UL 1434 CA 2 and 4)

  • Up to ±2 kV ESD protection (HBM C = 100 pF, R = 1.5 kΩ)

  • UL recognition: UL 1557, file E81734

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들