SKF 729124, Hydraulic Hand Pump, 250cm³, 100 MPa

SKF Hydraulic Pump

SKF Hydraulic Pump 728619 E

The SKF 728619 E is a two stage pump suitable for mounting bearings or components with a maximum pressure of 150 MPa.

Features and Benefits

• Oil container capacity 2550 cm³
• Two stage pressure pumping
• Fitted with pressure gauge and supplied with a sturdy case

Product Application Information

Can be used with SKF Supergrip Bolts and all sizes of SKF hydraulic nuts.

SKF Hydraulic Pump 729124

The SKF 729124 has been designed for use with SKF Hydraulic Nuts to mount bearings or components with a maximum pressure of 100 MPa.

Features and Benefits

• Oil container capacity 250 cm³
• Fitted with pressure gauge and supplied with a sturdy case

Product Application Information

Can be used with SKF Hydraulic Nuts. Ideal for use where space does not allow the use of quick connection.

Note

All SKF Hydraulic Pumps are filled with SKF Mounting Fluid LHMF 300 and are supplied with an extra litre of fluid

SKF Hydraulic Hand Pump, 100MPa, 3.5kg Weight - 729124

Use this hydraulic hand pump from SKF to mount bearings and components. It's compatible with SKF bearing nuts when producing an interference fit into cylindrical and tapered shafts. The pump uses a groundbreaking oil-injection method to push oil between the mating surfaces, virtually eliminating friction between them and easing the mounting of parts. It's designed for a maximum pressure of 100 megapascals (MPa). Because you don't need to machine keyways onto the shaft, it saves on both production time and materials.

• Hand-operated, so you keep full control at all times
• 250cm³ capacity provides adequate oil
• Fitted with a pressure gauge, so you know exactly how much you're applying
• Volume per stroke is equal to half a cubic centimeter, for the right amount of oil each time

Applications

• Manufacturing
• Automotive applications
• Agricultural equipment

Can this hydraulic pump be used to dismount bearing and components, as well as mounting them?

It cer

Yes. When dismounting parts, the injected oil can reduce the necessary pulling force by up to 90%, making the job substantially easier. The injected oil overcomes the interference fit and ejects the bearing from its seating with powerful force, making a puller or other assist unnecessary. A stop-nut is recommended to control the ejection.

Oil Injection Kits